Print Report | Back to Sample Detail

Sample Record for 2019-11-06-5

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-11-06-5
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 11/06/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/08/2019
The quantity of what the sample constitutes: 1
A brief description of the sample: 3/4inch RHMA-G SP WMA
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Syar Lake Herman Batch

Material Information

Source Identification (SMARA or name of Pit): 91-48-0002::LAKE HERMAN QUARRY
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 1

DIME Test ID: 2019-11-06-5-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 12/09/2019
Date Tested: 11/26/2019
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 6199.4 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 137.5 grams
Cumulative mass retained on the 1/2 in. sieve 976 grams
Cumulative mass retained on the 3/8 in. sieve 1923.2 grams
Mass retained on the 1/4 in. sieve 0 grams
Cumulative mass retained on the #4 sieve 4314.4 grams
Total sample mass passing the #4 sieve 1885 grams
Total mass of fine material in the sample 595.3 grams
Cumulative mass retained on the #8 sieve 318.5 grams
Cumulative mass retained on the #16 sieve 417.8 grams
Cumulative mass retained on the #30 sieve 455.5 grams
Cumulative mass retained on the #50 sieve 490.8 grams
Cumulative mass retained on the #100 sieve 520.7 grams
Cumulative mass retained on the #200 sieve 538.1 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 97.8 %
Cumulative percent passing the 1/2 in. sieve 84.3 %
Cumulative percent passing the 3/8 in. sieve 69 %
Cumulative percent passing the 1/4 in. sieve 100 %
Cumulative percent passing the #4 sieve 30.4 %
Cumulative percent passing the #8 sieve 14.1 %
Cumulative percent passing the #16 sieve 9.1 %
Cumulative percent passing the #30 sieve 7.1 %
Cumulative percent passing the #50 sieve 5.3 %
Cumulative percent passing the #100 sieve 3.8 %
Cumulative percent passing the #200 sieve 2.92 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.