Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 99999 DEA: 0322222
QA Service Level:
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Michael Maksimovich Structure Rep.: Unknown
DIME Sample ID: 2019-11-19-1
TL Number from the TL Form: 123
Sample Submitted By Organization: CT D04 - Richmond Field Laboratory
Sample Organization Contact: (510) 231-7151
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 11/19/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/19/2019
The quantity of what the sample constitutes: 750 Tons
A brief description of the sample: 3/4 RHMA
From where was the sample collected: Manufacturer
Laboratory sample identification: 23
Structure unique identifier: 07-2233
Structure name:
The fabricator/manufacturer/facility name: SYAR Lake Herman Drum
DIME Test ID: 2019-11-19-1-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 11/19/2019
Date Tested: 11/19/2019
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
2
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Water
|
|
Method Performed
|
no data
|
|
Mass of oven-dry sample in air for Sample 1
|
5000.0 grams
|
|
Mass of sample in water for Sample 1
|
505.0 grams
|
|
Mass of oven-dry sample in air for Sample 2
|
6000.0 grams
|
|
Mass of sample in water for Sample 2
|
510.0 grams
|
|
Temperature of Water
|
98 °F
|
|
Specific Gravity for Sample 1
|
1.112
|
|
Specific Gravity for Sample 2
|
1.093
|
|
Average Specific Gravity
|
1.103
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
DIME Test ID: 2019-11-19-1-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 03/24/2023
Date Tested: 11/20/2019
Submitted By Organization: CT D04 - Richmond Field Laboratory
Organization Address: 3401 Regatta Boulevard,
Organization City: Richmond
Organization State: CA
Organization Zipcode: 94508
Organization Email: santiago.sequeira@dot.ca.gov
Organization Phone: (510) 385-7641
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Number of tests
|
3
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Method Performed
|
no data
|
|
Mass of container filled with water
|
6000.0 grams
|
|
Mass of oven-dry sample in air for Sample 1
|
5555.0 grams
|
|
Mass of container filled with the sample and water for Sample 1
|
8000.0 grams
|
|
Mass of container filled with water
|
5555.0
|
|
Mass of oven-dry sample in air for Sample 2
|
9999.0 grams
|
|
Mass of container filled with the sample and water for Sample 2
|
77.0 grams
|
|
Mass of container filled with water
|
8666.0
|
|
Mass of oven-dry sample in air for Sample 3
|
4444.0 grams
|
|
Mass of container filled with the sample and water for Sample 3
|
444.0 grams
|
|
Temperature of Water
|
99 °F
|
|
Specific Gravity for Sample 1
|
1.563
|
|
Specific Gravity for Sample 2
|
0.646
|
|
Specific Gravity for Sample 3
|
0.351
|
|
Average Specific Gravity
|
0.853
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
