Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213520 DEA: 120M9004 EFIS: 1213000017
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-22-R5.6/R10.9
Work Description: RECHANNELIZE TO ENHANCE TRAFFIC FLOW
Location Description: ORANGE COUNTY AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF BROOKHURST STREET UNDERCROSSING IN GARDEN GROVE TO BEDFORD ROAD OVERCROSSING IN ORANGE
Contractor Name: POWELL CONSTRUCTORS, INC.
Contractor Address: 8555 Banana Avenue, Fontana, CA 92335
Resident Engineer: Adrian Wu Structure Rep.: Theodore Pham
DIME Sample ID: 2019-11-11-1
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Ductile Iron Cast Samples
Sample Taken Date: 11/11/2019
Date that the sample was received by the laboratory/organization performing the testing: 11/14/2019
The quantity of what the sample constitutes: 1
A brief description of the sample: Coupon Casting
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DSI, Dotson Iron
Heat Number (s): 3099
Part Number (s): 68 19 246
Material Specification: A536
Grades: 65-45-12
Metal Foundry Manufacturer (Mill): Dotson iron casting
Prestressing Manufacturer: DSI
DIME Test ID: 2019-11-11-1-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 11/15/2019
Date Tested: 11/15/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
1
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 3099 | 0.502 | 0.19792 | 46319 | 74354 | 19.2 | fsaylor |
| |
UTM
|
67kip
|
Temperature
|
72 F
|