Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 214111 DEA: 081J5604
QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-15,74,79-VAR.
Work Description: REPLACE AC SURFACING AND PLACE RHMA-G.
Location Description: RIVERSIDE COUNTY AT VARIOUS LOCATIONS
Contractor Name: All American Asphalt
Contractor Address: 400 E. 6th St., Corona, CA 92879
Resident Engineer: Mike Bergevin Structure Rep.: Unknown
DIME Sample ID: 2019-09-19-23
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 09/19/2019
Date that the sample was received by the laboratory/organization performing the testing: 10/17/2019
The quantity of what the sample constitutes: 2 box, 4 Core
A brief description of the sample: HMA 3/4" PG 64-16RB
From where was the sample collected: Manufacturer
Laboratory sample identification: 5A, 5B, 5C, 6A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt Corona
DIME Test ID: 2019-09-19-23-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 10/29/2019
Date Tested: 10/21/2019
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity
|
2.273
|
Bulk Specific Gravity 2
|
2.274
|
Bulk Specific Gravity 3
|
2.244
|
Average Bulk Specific Gravity
|
2.264
|
DIME Test ID: 2019-09-19-23-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 10/29/2019
Date Tested: 10/21/2019
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity
|
2.270
|
DIME Test ID: 2019-09-19-23-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 10/29/2019
Date Tested: 10/22/2019
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Water
|
Specific Gravity for Sample 1
|
2.466
|
Theoretical maximum density at 25°C (77°F)
|
no data
|