*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2019-09-27-26


Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-09-27-26
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Sample Organization Contact: (916) 227-7283
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 09/27/2019
Date that the sample was received by the laboratory/organization performing the testing:
The quantity of what the sample constitutes: 1
A brief description of the sample: 1/2 inch HMA-SP WMA PG 64-16
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

Source Identification (SMARA or name of Pit): 91-48-0002::LAKE HERMAN QUARRY
The fabricator's/manufacturer's product name for the sample:
The fabricator/manufacturer designation for the sample:
The plant number:
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled:
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number:
Lot number:
Sublot number:

Test Results

Test 1 of 9

DIME Test ID: 2019-09-27-26-1
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: aggregate quality sample T 335 coarse aggregate one fractured face.
Additional Comments When Verified:
Method 2 - Individual Fracture Determination
Aggregate Size and Fracture Type Coarse 1 Faced
Weighted average percentage of fractured, coarse, 1 faced particles 98 %

Test Results

Test 2 of 9

DIME Test ID: 2019-09-27-26-2
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: aggregate quality sample T 335 coarse aggregate two fractured face.
Additional Comments When Verified:
Method 2 - Individual Fracture Determination
Aggregate Size and Fracture Type Coarse 2 Faced
Weighted average percentage of fractured, coarse, 2 faced particles 96 %

Test Results

Test 3 of 9

DIME Test ID: 2019-09-27-26-3
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: aggregate quality sample T 335 fine aggregate one fractured face.
Additional Comments When Verified:
Method 2 - Individual Fracture Determination
Aggregate Size and Fracture Type Fine 1 Faced
Percentage of fractured, fine, 1 faced particles tested 100 %

Test Results

Test 4 of 9

DIME Test ID: 2019-09-27-26-4
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: aggregate quality sample T 96 Los Angeles Rattler
Additional Comments When Verified:
Grading designation B
Percent loss after 100 revolutions 3 %
Percent loss after 500 revolutions 17 %

Test Results

Test 5 of 9

DIME Test ID: 2019-09-27-26-5
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Sand equivalent T176
Additional Comments When Verified:
Sand Equivalent 65

Test Results

Test 6 of 9

DIME Test ID: 2019-09-27-26-6
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Fine aggregate angularity T304
Additional Comments When Verified:
What test method is performed? Method A
Bulk dry specific gravity 2.625
Average uncompacted voids 45.8 %

Test Results

Test 7 of 9

DIME Test ID: 2019-09-27-26-7
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Flat and elongated particles (by mass at 5:1) T4791
Additional Comments When Verified:
Method B
Determination By Mass
Dimensional ratio used 1:5
Weighted percentage of particles (by mass) that were flat and elongated 0.0 %
Weighted percentage of particles (by mass) that were not flat and elongated 100 %

Test Results

Test 8 of 9

DIME Test ID: 2019-09-27-26-8
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: Bulk Specific Gravity coarse aggregate T 85
Additional Comments When Verified:
Basis for relative density testing Bulk
Specific Gravity 2.651
Absorption 3.4 %

Test Results

Test 9 of 9

DIME Test ID: 2019-09-27-26-9
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Verified Date: 10/29/2019
Date Tested: 09/27/2019
Submitted By Organization: CT HQ - Sacramento Concrete Testing Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: T 84
Additional Comments When Verified:
Bulk specific gravity 2.584
Bulk specific gravity (SSD Basis) 2.742
Apparent specific gravity 2.899
Absorption 4.2 %