Sample Record for 2019-10-10-5
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 208945 DEA: 07288604 EFIS: 0700021080 COOP: 074663
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-710-6.0-9.4
Work Description: Gerald Desmond Bridge Replacement - A Design Build project. IQA samples will be selected by Port/Caltrans representatives and sent to Translab for testing.
Location Description: Port of Long Beach (District 7)
Contractor Name: Shimmick/FCC/Impregilo (SFI) JV
Contractor Address: 11 Golden Shore, Suite 330, Long Beach, CA 90802
Resident Engineer: Structure Rep.: Sami Deeb
Sample Information
DIME Sample ID: 2019-10-10-5
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 10/10/2019
Date that the sample was received by the laboratory/organization performing the testing: 10/15/2019
The quantity of what the sample constitutes: 1
A brief description of the sample: 1-1/4 A490 Bolt
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: LeJeune Bolt Company
Material Information
Rocap Number(s): L1413464
Heat Number(s): 6214661005 198520
Nut Mfg. Lot Number(s): 30581-6214661005Z
Washer Mfg. Lot Number(s): D7916Z
Bolt Specification: F3125/A490
Bolt Length(s): 9 1/2
Nut Specification: A563
Washer Specification: F436
Finish: Geomet
Diameter/Size: 1 1/4
Bolt Mfg. Lot Number: 082119-1HBZ
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test Results
Test 1 of 18
DIME Test ID: 2019-10-10-5-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A490 Wedge Tensil
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1A | 082119-1HB | 1.2500 | 153393 | 682.33 | 6.00 | A490 Wedge Tensil | randelin |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 2 of 18
DIME Test ID: 2019-10-10-5-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A490 Wedge Tensile
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 1B | 082119-1HB | 1.2500 | 154314 | 686.42 | 6.00 | A490 Wedge Tensile | randelin |
| |
|
UTM
|
450kip
|
|
Temperature
|
no data
|
Test 3 of 18
DIME Test ID: 2019-10-10-5-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 30581-6214661005 | | 169944 | | Nut Proof Load | randelin |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 4 of 18
DIME Test ID: 2019-10-10-5-4
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1B | 30581-6214661005 | | 170500 | | Nut Proof Load | randelin |
| |
|
UTM
|
450kip
|
|
Temperature
|
72 f
|
Test 5 of 18
DIME Test ID: 2019-10-10-5-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
082119-1HB
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
BBC A490
|
|
Size
|
1.25 in
|
|
Bolt Length
|
9.5 in
|
|
Gage Type
|
Pass
|
Test 6 of 18
DIME Test ID: 2019-10-10-5-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
082119-1HB
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
BBC A490
|
|
Size
|
1.25 in
|
|
Bolt Length
|
9.5 in
|
|
Gage Type
|
Pass
|
Test 7 of 18
DIME Test ID: 2019-10-10-5-7
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
30581-6214661005
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
DH3 U
|
|
Size
|
1.25 in
|
|
Gage Type
|
Pass
|
Test 8 of 18
DIME Test ID: 2019-10-10-5-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
30581-6214661005
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
DH3 U
|
|
Size
|
1.25 in
|
|
Gage Type
|
Pass
|
Test 9 of 18
DIME Test ID: 2019-10-10-5-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
082119-1HB
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
BBC A490
|
|
Size
|
1.25 in
|
|
Bolt Length
|
9.5 in
|
|
Measurement Average
|
0.74 mils
|
Test 10 of 18
DIME Test ID: 2019-10-10-5-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
082119-1HB
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
BBC A490
|
|
Size
|
1.25 in
|
|
Bolt Length
|
9.5 in
|
|
Measurement Average
|
1.02 mils
|
Test 11 of 18
DIME Test ID: 2019-10-10-5-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
30581-6214661005
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
DH3 U
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
0.32 mils
|
Test 12 of 18
DIME Test ID: 2019-10-10-5-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
30581-6214661005
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
DH3 U
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
0.39 mils
|
Test 13 of 18
DIME Test ID: 2019-10-10-5-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D7916
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
F436.3 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
0.25 mils
|
Test 14 of 18
DIME Test ID: 2019-10-10-5-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D7916
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
F436.3 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
0.33 mils
|
Test 15 of 18
DIME Test ID: 2019-10-10-5-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D7916
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
F436.3 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
0.44 mils
|
Test 16 of 18
DIME Test ID: 2019-10-10-5-16
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D7916
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
F436.3 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
39.05
|
|
Spacing
|
Ok
|
Test 17 of 18
DIME Test ID: 2019-10-10-5-17
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D7916
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
F436.3 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
40.35
|
|
Spacing
|
Ok
|
Test 18 of 18
DIME Test ID: 2019-10-10-5-18
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/22/2019
Date Tested: 10/17/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
D7916
|
|
Finish Coating
|
ASTM F1136 - Dachromet or Geomet
|
|
Product Markings
|
F436.3 P
|
|
Size
|
1.25 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
38.85
|
|
Spacing
|
Ok
|
