Print Report | Back to Sample Detail

Sample Record for 2019-10-02-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:

DIST-CO-RTE-PM: ---

Work Description: Special project identifier for material not associated with a project

Location Description:

Contractor Name: Unknown

Contractor Address: Unknown

Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-10-02-7

TL Number from the TL Form:

Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office

Sample Organization Contact: (858) 285-5797

Type of Sample: Quality Assurance

Type of Material: SMTL TM3 - Fastener Assembly

Sample Taken Date: 10/02/2019

Date that the sample was received by the laboratory/organization performing the testing: 10/10/2019

The quantity of what the sample constitutes: 147

A brief description of the sample: 3/4"-10 x 24" DES

From where was the sample collected: Fabricator

Laboratory sample identification:

Structure unique identifier:

Structure name:

The fabricator/manufacturer/facility name: A and M Nut and Bolt

Material Information

Rocap Number(s):

Heat Number(s): 5803816905

Nut Mfg. Lot Number(s): 29990-75074513

Washer Mfg. Lot Number(s): 313660

Bolt Specification: ASTM F1554-15 Gr 55-S1

Bolt Length(s): 24"

Nut Specification: ASTM A194-14a Gr 2H

Washer Specification: ASTM F436

Finish: HDG

Diameter/Size: .75"

Bolt Mfg. Lot Number: 47385-PPO

Rocap Test Requirement(s):

Lubricant Requirements(s):

Test Results

Test 1 of 28

DIME Test ID: 2019-10-02-7-1

Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)

Verified Date: 10/15/2019

Date Tested: 10/14/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test: nut proof load

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Bolt Mfg. Lot Number	Size (in)	Peak Load (lbf)	Peak Load (kN)	Comments	Tested By
1A	29990-75074513		58696		nut proof load	randelin

UTM

400kip

Temperature

72 f

Test 2 of 28

DIME Test ID: 2019-10-02-7-2

Verified Date: 10/15/2019

Date Tested: 10/14/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test: nut proof load

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Bolt Mfg. Lot Number	Size (in)	Peak Load (lbf)	Peak Load (kN)	Comments	Tested By
1B	29990-75074513		58710		nut proof load	randelin

UTM

400kip

Temperature

72 f

Test 3 of 28

DIME Test ID: 2019-10-02-7-3

Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Heat Number	Diameter (in)	Area (sqin)	Stress at Offset (psi)	Tensile Strength (psi)	Elongation in 4 x d (%)	Tested By
1	58038169-05	0.505	0.2	67156	90013	27.8	fsaylor

UTM

67kip

Temperature

72 f

Test 4 of 28

DIME Test ID: 2019-10-02-7-4

Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Number of Samples

Sample	Heat Number	Diameter (in)	Area (sqin)	Stress at Offset (psi)	Tensile Strength (psi)	Elongation in 4 x d (%)	Tested By
2	58038169-05	0.501	0.197	66811	89813	27.8	fsaylor

UTM

67kip

Temperature

72 f

Test 5 of 28

DIME Test ID: 2019-10-02-7-5

Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	58038169-05
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW
Size	.75 in
Bolt Length	24 in
Gage Type	Pass

Test 6 of 28

DIME Test ID: 2019-10-02-7-6

Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	58038169-05
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW
Size	.75 in
Bolt Length	24 in
Gage Type	Pass

Test 7 of 28

DIME Test ID: 2019-10-02-7-7

Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	58038169-05
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW
Size	.75 in
Bolt Length	24 in
Gage Type	Pass

Test 8 of 28

DIME Test ID: 2019-10-02-7-8

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Gage Type	Pass

Test 9 of 28

DIME Test ID: 2019-10-02-7-9

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Gage Type	Pass

Test 10 of 28

DIME Test ID: 2019-10-02-7-10

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Gage Type	Pass

Test 11 of 28

DIME Test ID: 2019-10-02-7-11

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1D
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Gage Type	Pass

Test 12 of 28

DIME Test ID: 2019-10-02-7-12

Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1E
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Gage Type	Pass

Test 13 of 28

DIME Test ID: 2019-10-02-7-13

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	58038169-05
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW
Size	.75 in
Bolt Length	24 in
Measurement Average	4.13 mils

Test 14 of 28

DIME Test ID: 2019-10-02-7-14

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	58038169-05
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW
Size	.75 in
Bolt Length	24 in
Measurement Average	4.13 mils

Test 15 of 28

DIME Test ID: 2019-10-02-7-15

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	58038169-05
Mfg. Lot Number	no data
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	YELLOW
Size	.75 in
Bolt Length	24 in
Measurement Average	3.94 mils

Test 16 of 28

DIME Test ID: 2019-10-02-7-16

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Bolt Length	no data in
Measurement Average	3.37 mils

Test 17 of 28

DIME Test ID: 2019-10-02-7-17

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Bolt Length	no data in
Measurement Average	2.61 mils

Test 18 of 28

DIME Test ID: 2019-10-02-7-18

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Bolt Length	no data in
Measurement Average	3.17 mils

Test 19 of 28

DIME Test ID: 2019-10-02-7-19

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1D
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Bolt Length	no data in
Measurement Average	2.89 mils

Test 20 of 28

DIME Test ID: 2019-10-02-7-20

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1E
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	29990-75074513
Finish Coating	ASTM F2329 - Hot Dip
Product Markings	2H 2N U
Size	.75 in
Bolt Length	no data in
Measurement Average	3.56 mils

Test 21 of 28

DIME Test ID: 2019-10-02-7-21

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Measurement Average	2.92 mils

Test 22 of 28

DIME Test ID: 2019-10-02-7-22

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Measurement Average	2.34 mils

Test 23 of 28

DIME Test ID: 2019-10-02-7-23

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Measurement Average	2.18 mils

Test 24 of 28

DIME Test ID: 2019-10-02-7-24

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1D
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Measurement Average	2.41 mils

Test 25 of 28

DIME Test ID: 2019-10-02-7-25

Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1E
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Measurement Average	2.06 mils

Test 26 of 28

DIME Test ID: 2019-10-02-7-26

Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1A
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Hardness Reading Scale	C Scale
Hardness Reading Average	40.8
Spacing	Ok

Test 27 of 28

DIME Test ID: 2019-10-02-7-27

Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1B
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Hardness Reading Scale	C Scale
Hardness Reading Average	40.9
Spacing	Ok

Test 28 of 28

DIME Test ID: 2019-10-02-7-28

Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)

Verified Date: 10/15/2019

Date Tested: 10/15/2019

Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory

Organization Address: 5900 Folsom Boulevard,

Organization City: Sacramento

Organization State: CA

Organization Zipcode: 95819

Organization Email: joshua.moore@dot.ca.gov

Organization Phone: (530) 329-6527

General Comments for this Test:

Test Result Compliance:

Additional Comments When Verified:

Sample No.	1C
Rocap Number	no data
Heat Number(s)	no data
Mfg. Lot Number	313660
Finish Coating	ASTM B695 - Mech Galv
Product Markings	WS
Size	.75 in
Bolt Length	no data in
Hardness Reading Scale	C Scale
Hardness Reading Average	41.15
Spacing	Ok