Print Report | Back to Sample Detail

Sample Record for 2019-08-16-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-08-16-18
TL Number from the TL Form:
Sample Submitted By Organization: CT D05 - Field Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Verification
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 08/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 08/23/2019
The quantity of what the sample constitutes: One JMF Verification
A brief description of the sample: Aggregate, Loose Mix, Asphalt, LAS, RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Papich Paso Robles

Material Information

RAP Source: Papich Paso Robles
Aggregate Size: 1/2
Aggregate Source: Unknown
RAP Stockpile: Static
Stockpile Size (tons): Unknown

Test Results

Test 1 of 3

DIME Test ID: 2019-08-16-18-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/26/2019
Date Tested: 05/01/2019
Submitted By Organization: CT D05 - Field Laboratory
Organization Address: 50 Higuera St,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.418

Test 2 of 3

DIME Test ID: 2019-08-16-18-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 09/26/2019
Date Tested: 05/01/2019
Submitted By Organization: CT D05 - Field Laboratory
Organization Address: 50 Higuera St,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Asphalt Binder Content 5.59 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 3 of 3

DIME Test ID: 2019-08-16-18-3
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 09/26/2019
Date Tested: 09/17/2019
Submitted By Organization: CT D05 - Field Laboratory
Organization Address: 50 Higuera St,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test: These are corrected, versus uncorrected to illustrate the difference.
Test Result Compliance: not applicable
Additional Comments When Verified:
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 99.7 %
Cumulative percent passing the 3/8 in. sieve 89.9 %
Cumulative percent passing the 1/4 in. sieve no data
Cumulative percent passing the #4 sieve 60.8 %
Cumulative percent passing the #8 sieve 41.6 %
Cumulative percent passing the #16 sieve 29.5 %
Cumulative percent passing the #30 sieve 21.1 %
Cumulative percent passing the #50 sieve 15.3 %
Cumulative percent passing the #100 sieve 10.3 %
Cumulative percent passing the #200 sieve 6.7 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.