Print Report | Back to Sample Detail

Sample Record for 2019-09-16-10

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-09-16-10
TL Number from the TL Form: NA
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM10 - Wire Rope Choker
Sample Taken Date: 09/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 09/17/2019
The quantity of what the sample constitutes: 4
A brief description of the sample: Wire Rope
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Caltrans

Material Information

Reel Number: 2
Painter Name or ID: 103070
Material Specification: ASTM A931
Size: 5/16 in
Wire Manufacturer: Unknown
Material Collected to Test: Operator

Test Results

Test 1 of 2

DIME Test ID: 2019-09-16-10-1
Test Method: ASTM A931-0810: Standard Test Method for Tension Testing of Wire Ropes and Strand (Breaking Force)
Verified Date: 09/20/2019
Date Tested: 09/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
UTM 67KIP
Specimen Identification 1
Peak Load 11482.5 lbf
Operator bewing
Location of Failure at crimp

Test 2 of 2

DIME Test ID: 2019-09-16-10-2
Test Method: ASTM A931-0810: Standard Test Method for Tension Testing of Wire Ropes and Strand (Breaking Force)
Verified Date: 09/20/2019
Date Tested: 09/20/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Temperature 72 f
UTM 67KIP
Specimen Identification 2
Peak Load 11474.1 lbf
Operator bewing
Location of Failure At Crimp