Print Report | Back to Sample Detail

Sample Record for 2019-08-16-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-08-16-11
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 08/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 09/10/2019
The quantity of what the sample constitutes: 5
A brief description of the sample: A325 1.5" Bolts
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Ameron International

Material Information

Rocap Number(s):
Heat Number(s): 188566
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s): NA
Bolt Specification: F3125 A325
Bolt Length(s): 4.5"
Nut Specification: NA
Washer Specification: NA
Finish: F2329
Diameter/Size: 1.5"
Bolt Mfg. Lot Number: 80404-A
Rocap Test Requirement(s):
Lubricant Requirements(s): Blue Wax
Test results on following page(s): 12

Test Results

Test 1 of 12

DIME Test ID: 2019-08-16-11-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Bolt
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
180404-A1.5000202265899.726.00A325 Boltbewing
UTM 450kip
Temperature no data

Test 2 of 12

DIME Test ID: 2019-08-16-11-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325 Bolt
Test Result Compliance:
Additional Comments When Verified:
Number of Bolt Samples 1
SampleBolt Mfg. Lot NumberSize (in)Peak Load (lbf)Peak Load (kN)Wedge Angle (deg)CommentsTested By
280404-A1.5000191884853.546.00A325 Boltbewing
UTM 450kip
Temperature no data

Test 3 of 12

DIME Test ID: 2019-08-16-11-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Gage Type Pass

Test 4 of 12

DIME Test ID: 2019-08-16-11-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Gage Type Pass

Test 5 of 12

DIME Test ID: 2019-08-16-11-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Gage Type Pass

Test 6 of 12

DIME Test ID: 2019-08-16-11-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Gage Type Pass

Test 7 of 12

DIME Test ID: 2019-08-16-11-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Gage Type Pass

Test 8 of 12

DIME Test ID: 2019-08-16-11-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 4.68 mils

Test 9 of 12

DIME Test ID: 2019-08-16-11-9
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1B
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 5.27 mils

Test 10 of 12

DIME Test ID: 2019-08-16-11-10
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1C
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 7.07 mils

Test 11 of 12

DIME Test ID: 2019-08-16-11-11
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1D
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 7.58 mils

Test 12 of 12

DIME Test ID: 2019-08-16-11-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 09/20/2019
Date Tested: 09/18/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1E
Rocap Number no data
Heat Number(s) 80404-A
Mfg. Lot Number no data
Finish Coating ASTM F2329 - Hot Dip
Product Markings BF A325
Size 1.5 in
Bolt Length 4.5 in
Measurement Average 6.05 mils