Print Report | Back to Sample Detail

Sample Record for 2019-07-25-14

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213877 DEA: 060X8904 EFIS: 0618000179 QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-41-0.0/11.5
Work Description: COLD PLANE AC PAVEMENT AND PLACE RHMA TYPE G.
Location Description: KINGS COUNTY ABOUT 6.5 MILES SOUTH OF KETTLEMAN CITY FROM KERN COUNTY LINE TO 0.1 MILE SOUTH OF UTICA AVENUE
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 SUNRISE TERRACE;, ARROYO GRANDE CA 93420
Resident Engineer: Michael Stavropoulos Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-07-25-14
TL Number from the TL Form: C816114-Lot 1-SL19
Sample Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Sample Organization Contact: (916) 227-7204
Type of Sample: Per Request
Type of Material: Aggregate
Sample Taken Date: 07/25/2019
Date that the sample was received by the laboratory/organization performing the testing: 08/29/2019
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: 1/2" HMA
From where was the sample collected: Source
Laboratory sample identification: 19-HMA-0140
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM Avenal-Plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): not supply
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number: 1
Sublot number: 19
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2019-07-25-14-1
Test Method: AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 09/04/2019
Date Tested: 08/29/2019
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Which test procedure is being used Method A
Percent of sample passing the #200 sieve (by mass) 7.2 %

Test 2 of 2

DIME Test ID: 2019-07-25-14-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 09/04/2019
Date Tested: 08/30/2019
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 95.8 %
Cumulative percent passing the 3/8 in. sieve 78.8 %
Cumulative percent passing the 1/4 in. sieve 100 %
Cumulative percent passing the #4 sieve 38.5 %
Cumulative percent passing the #8 sieve 21.3 %
Cumulative percent passing the #16 sieve 12.7 %
Cumulative percent passing the #30 sieve 8 %
Cumulative percent passing the #50 sieve 5.1 %
Cumulative percent passing the #100 sieve 3.7 %
Cumulative percent passing the #200 sieve 2.79 %