Print Report | Back to Sample Detail

Sample Record for 2019-07-10-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213877 DEA: 060X8904 EFIS: 0618000179 QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-41-0.0/11.5
Work Description: COLD PLANE AC PAVEMENT AND PLACE RHMA TYPE G.
Location Description: KINGS COUNTY ABOUT 6.5 MILES SOUTH OF KETTLEMAN CITY FROM KERN COUNTY LINE TO 0.1 MILE SOUTH OF UTICA AVENUE
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 SUNRISE TERRACE;, ARROYO GRANDE CA 93420
Resident Engineer: Michael Stavropoulos Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-07-10-15
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Dispute Resolution
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/10/2019
Date that the sample was received by the laboratory/organization performing the testing: 07/10/2019
The quantity of what the sample constitutes: 10
A brief description of the sample: 1/2 inch RHMA-G
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Millbrook construction Fresno Papich Construction

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: 11
HMA Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2019-07-10-15-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 12/17/2019
Date Tested: 08/29/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: Translab Internal lab id: 019-017 Sample: 1/2 inch RHMA-G (Dispute Resolution) SL-11 AASHTO T-209
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
What is the unit of measurement for theoretical density? US Units
Mass Determination Water
Method Performed no data
Mass of oven-dry sample in air for Sample 1 1677.0 grams
Mass of sample in water for Sample 1 960.0 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.341
Theoretical maximum density at 25°C (77°F) no data