Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213650 DEA: 081E8504 EFIS: 0814000114
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-142-0.0/5.8
Work Description: COLD PLANE/OVERLAY, HMA DIKES, INSTALL MGS AND DRAINAGE FACILITIES
Location Description: SAN BERNARDINO COUNTY IN AND NEAR CHINO HILLS FROM ORANGE COUNTY LINE TO ROUTE 142/71 SEPARATION.
Contractor Name: All American Aspalt
Contractor Address: 400 E Sixth St., Corona, CA, 92879
Resident Engineer: Ehirim Dominic Okechukwu Structure Rep.: Unknown
DIME Sample ID: 2019-07-12-9
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Sample Organization Contact: 9512323690
Type of Sample: Quality Assurance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 07/12/2019
Date that the sample was received by the laboratory/organization performing the testing: 08/12/2019
The quantity of what the sample constitutes: 2 box, 6 cores
A brief description of the sample: RHMA 3/4" Type G-SP
From where was the sample collected: Manufacturer
Laboratory sample identification: 1A29, 1B29, 1C29, 1D29, 1E29, 1F29
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: AAA-Corona
DIME Test ID: 2019-07-12-9-1
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/17/2019
Date Tested: 08/15/2019
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity
|
2.237
|
Bulk Specific Gravity 2
|
2.229
|
Bulk Specific Gravity 3
|
2.269
|
Average Bulk Specific Gravity
|
2.245
|
DIME Test ID: 2019-07-12-9-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 09/17/2019
Date Tested: 08/15/2019
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity
|
2.228
|
Bulk Specific Gravity 2
|
2.233
|
Bulk Specific Gravity 3
|
2.232
|
Average Bulk Specific Gravity
|
2.231
|
DIME Test ID: 2019-07-12-9-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 09/17/2019
Date Tested: 08/14/2019
Submitted By Organization: CT D08 - Fontana Field Testing Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: prakash.gowda@dot.ca.gov
Organization Phone: (951) 232-3690
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests
|
1
|
What is the unit of measurement for theoretical density?
|
US Units
|
Mass Determination
|
Water
|
Specific Gravity for Sample 1
|
2.439
|
Theoretical maximum density at 25°C (77°F)
|
no data
|