Print Report | Back to Sample Detail

Sample Record for 2019-07-22-20

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213877 DEA: 060X8904 EFIS: 0618000179 QA Service Level: 1
DIST-CO-RTE-PM: 06-KIN-41-0.0/11.5
Work Description: COLD PLANE AC PAVEMENT AND PLACE RHMA TYPE G.
Location Description: KINGS COUNTY ABOUT 6.5 MILES SOUTH OF KETTLEMAN CITY FROM KERN COUNTY LINE TO 0.1 MILE SOUTH OF UTICA AVENUE
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 SUNRISE TERRACE;, ARROYO GRANDE CA 93420
Resident Engineer: Michael Stavropoulos Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-07-22-20
TL Number from the TL Form: C816176-15
Sample Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Sample Organization Contact: (915) 296-1892
Type of Sample: Quality Assurance
Type of Material: Aggregate
Sample Taken Date: 07/22/2019
Date that the sample was received by the laboratory/organization performing the testing: 07/26/2019
The quantity of what the sample constitutes: 1 bag
A brief description of the sample: sublot 15
From where was the sample collected: Other
Laboratory sample identification: 19-RHMA-0127
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: sample from plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): SPM Avenal CA
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: 15
Aggregate Mix Number:
Test results on following page(s): 2

Test Results

Test 1 of 2

DIME Test ID: 2019-07-22-20-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: Ryan.Kester@dot.ca.gov
Organization Phone: (915) 296-1892
This test has been superseded on 08/19/2019.
Reason: corrected

Test 2 of 2

DIME Test ID: 2019-07-22-20-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 08/19/2019
Date Tested: 08/01/2019
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ryan.kester@dot.ca.gov
Organization Phone: (916) 227-7215
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 97.5 %
Cumulative percent passing the 3/8 in. sieve 85.2 %
Cumulative percent passing the 1/4 in. sieve 100 %
Cumulative percent passing the #4 sieve 38.4 %
Cumulative percent passing the #8 sieve 16.2 %
Cumulative percent passing the #16 sieve 10.1 %
Cumulative percent passing the #30 sieve 6.7 %
Cumulative percent passing the #50 sieve 4.7 %
Cumulative percent passing the #100 sieve 3.5 %
Cumulative percent passing the #200 sieve 2.67 %