Print Report | Back to Sample Detail

Sample Record for 2019-05-29-28

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213791 DEA: 024H2204 EFIS: 0218000096 QA Service Level: 1
DIST-CO-RTE-PM: 02-SIS-89-28.0/34.0
Work Description: PAVEMENT OVERLAY.
Location Description: SISKIYOU COUNTY NEAR MCCLOUD FROM 0.5 MILE SOUTH OF MOUNTAIN HOUSE ROAD TO 0.3 MILE SOUTH OF AZALEA ROAD
Contractor Name: STIMPEL-WIEBELHAUS ASSOC.
Contractor Address: P.O. BOX 492335, REDDING, CA 96049
Resident Engineer: Nicole Mallory Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-05-29-28
TL Number from the TL Form: 991042
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/29/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/29/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Treated Virgin 1/2-inch Type A Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77896A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fawndale Rock and Asphalt

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-45-0017::FAWNDALE ROCK QUARRY
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: 19-1001.318-A
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: JMF 19-13-S1
Lot number: 0
Sublot number: 0
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2019-05-29-28-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 07/10/2019
Date Tested: 05/30/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 92.1 %
Cumulative percent passing the 3/8 in. sieve 73.1 %
Cumulative percent passing the 1/4 in. sieve 56.7 %
Cumulative percent passing the #4 sieve 50 %
Cumulative percent passing the #8 sieve 30.1 %
Cumulative percent passing the #16 sieve 18.5 %
Cumulative percent passing the #30 sieve 12.2 %
Cumulative percent passing the #50 sieve 8.6 %
Cumulative percent passing the #100 sieve 6.5 %
Cumulative percent passing the #200 sieve 5.15 %