Print Report | Back to Sample Detail

Sample Record for 2019-06-17-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212911 DEA: 081F9404 EFIS: 0815000067 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-79-R4.7/R10.6
Work Description: COLD PLANE, OVERLAY WITH RUBBERIZED HOT MIX ASPHALT (TYPE G)
Location Description: RIVERSIDE COUNTY FROM 0.1 MILE SOUTH OF MURRIETA HOT SPRINGS ROAD TO 0.1MILE NORTH OF ABELIA ROAD
Contractor Name: R J NOBLE COMPANY
Contractor Address: 15505 E Lincoln Ave, Orange, CA 92865
Resident Engineer: Mike Bergevin Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-06-17-15
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 06/17/2019
Date that the sample was received by the laboratory/organization performing the testing: 06/19/2019
The quantity of what the sample constitutes: 2 boxes
A brief description of the sample: 3/4" RHMA-G PG 64-16RB (0.5% LAS)
From where was the sample collected: Source
Laboratory sample identification: 0354G-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: RJ Noble-Corona

Material Information

HMA Type: RHMA-G
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2019-06-17-15-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 07/10/2019
Date Tested: 06/20/2019
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 7.73 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data