Sample Record for 2019-06-27-11
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213569 DEA: 024F2104 EFIS: 0212000072
QA Service Level: 1
DIST-CO-RTE-PM: 02-MOD-299-0.5/1.0
Work Description: Butte and Ash Creek Bridge Replacement
Location Description: Construction of Butte Creek Bridge and Ash Creek Bridge on Route 299 at Adin
Contractor Name: WEST COAST CONTRACTORS
Contractor Address: 61050 Highway 101, Coos Bay, Oregon 97420
Resident Engineer: Mike Zdenek Structure Rep.: Ryan G Duran
Sample Information
DIME Sample ID: 2019-06-27-11
TL Number from the TL Form: C897177
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM5 - Headed Bars
Sample Taken Date: 06/27/2019
Date that the sample was received by the laboratory/organization performing the testing: 07/03/2019
The quantity of what the sample constitutes: 4
A brief description of the sample: End Anchors
From where was the sample collected: Job Site
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Barsplice
Material Information
Production or Authorization Testing: Production Testing
Rebar Heat Number(s): 65030672
Head Manufacturer Lot Number(s): Barsplice
Rebar Size: 9
Headed Bar Model Name: Barsplice Buttonhead 10AB
Size of Head: Full Size - 9x
Head Connection Type: Crimped Head
Head Shape: Circular
Rebar Manufacturer: Gerdau
Head Manufacturer: Barsplice
Head Fabricator: Barsplice
Material Standard Code: ASTM A706
Headed Bar Unique ID:
Test Results
Test 1 of 4
DIME Test ID: 2019-06-27-11-1
Test Method: ASTM A970-15e1: Standard Specification for Headed Steel Bars for Concrete Reinforcement (Tensile)
Verified Date: 07/10/2019
Date Tested: 07/03/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Bar Broke; OK Necking
Test Result Compliance:
Additional Comments When Verified:
|
Number of Headed Bar Samples
|
1
|
| Lot # | Area (sqin) | Peak Load (lbf) | Tensile Strength (psi) | Comments | Tested By | | 1 | 1 | 98080 | 98080 | Bar Broke | Brian |
| |
|
Temperature
|
72 F
|
|
UTM
|
400KIP
|
Test 2 of 4
DIME Test ID: 2019-06-27-11-2
Test Method: ASTM A970-15e1: Standard Specification for Headed Steel Bars for Concrete Reinforcement (Tensile)
Verified Date: 07/10/2019
Date Tested: 07/03/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Head Pulled Off
Test Result Compliance:
Additional Comments When Verified:
|
Number of Headed Bar Samples
|
1
|
| Lot # | Area (sqin) | Peak Load (lbf) | Tensile Strength (psi) | Comments | Tested By | | 1 | 1 | 97410 | 97410 | Head Pulled Off | Brian |
| |
|
Temperature
|
72 F
|
|
UTM
|
400KIP
|
Test 3 of 4
DIME Test ID: 2019-06-27-11-3
Test Method: ASTM A970-15e1: Standard Specification for Headed Steel Bars for Concrete Reinforcement (Tensile)
Verified Date: 07/10/2019
Date Tested: 07/03/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Head Pulled Off
Test Result Compliance:
Additional Comments When Verified:
|
Number of Headed Bar Samples
|
1
|
| Lot # | Area (sqin) | Peak Load (lbf) | Tensile Strength (psi) | Comments | Tested By | | 1 | 1 | 92030 | 92030 | Head Pulled Off | Brian |
| |
|
Temperature
|
72 F
|
|
UTM
|
400KIP
|
Test 4 of 4
DIME Test ID: 2019-06-27-11-4
Test Method: ASTM A970-15e1: Standard Specification for Headed Steel Bars for Concrete Reinforcement (Tensile)
Verified Date: 07/10/2019
Date Tested: 07/03/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Head Popped Off
Test Result Compliance:
Additional Comments When Verified:
|
Number of Headed Bar Samples
|
1
|
| Lot # | Area (sqin) | Peak Load (lbf) | Tensile Strength (psi) | Comments | Tested By | | 1 | 1 | 92850 | 92850 | Head Popped Off | Brian |
| |
|
Temperature
|
72 F
|
|
UTM
|
400KIP
|
