Sample Record for 2019-06-06-11
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213750 DEA: 120K0224 EFIS: 1214000097
QA Service Level: 1
DIST-CO-RTE-PM: 12-ORA-5-14.5/17.1
Work Description: South County Improvement Project (Phase 2 - Oso/Alicia) CONST BRIDGES, RW, SW, HMA PVMT, JPCP, DRAINAGE, AND ELECT SYSTEMS.
Location Description: ORANGE COUNTY IN MISSION VIEJO AND LAGUNA HILLS FROM 0.7 MILE SOUTH OF OSO PARKWAY OVERCROSSING TO 0.3 MILE SOUTH OF ALICIA PARKWAY OVERCROSSING
Contractor Name: Flatiron West, Inc
Contractor Address: 1770 La Costa Meadows Drive, San Marcos, California 92078
Resident Engineer: John Hong Structure Rep.: Sara Soleimani
Sample Information
DIME Sample ID: 2019-06-06-11
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 06/06/2019
Date that the sample was received by the laboratory/organization performing the testing: 06/12/2019
The quantity of what the sample constitutes: 1
A brief description of the sample: Bearing Pad
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Dynamic Rubber
Material Information
Mfg. Lot Number(s): 15460
Material/Compound/Elastomer ID: na
Samples Representing: 144
Description (size): 5.18"x18"x18" 4.60"x18"x18" 2.30"x12x12""
Comments: CR55 007 19 CR55 008 19 CR55 012 19
Description (Number of Shims): 9 4
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): Dynamic Rubber
Batch Number: na
Test Results
Test 1 of 6
DIME Test ID: 2019-06-06-11-1
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 06/21/2019
Date Tested: 06/13/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Temperature
|
72 f
|
|
Humidity
|
50 %
|
|
Reading #1
|
50
|
|
Reading #2
|
50
|
|
Reading #3
|
50
|
|
Reading #4
|
50
|
|
Reading #5
|
50
|
|
Mean
|
50
|
Test 2 of 6
DIME Test ID: 2019-06-06-11-2
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 06/21/2019
Date Tested: 06/13/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
Unit of the Ultimate Tensile Values
|
lbf per sqr in
|
|
UTM
|
2KIP
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.065 in
|
|
Sample 1 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 1 Ultimate Tensile
|
2331.3 lbf/in^2
|
|
Sample 1 Elongation (350% Min)
|
Pass
|
|
Sample 2 Median Thickness
|
0.064 in
|
|
Sample 2 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 2 Ultimate Tensile
|
2250 lbf/in^2
|
|
Sample 2 Elongation (350% Min)
|
Pass
|
|
Sample 3 Median Thickness
|
0.058 in
|
|
Sample 3 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 3 Ultimate Tensile
|
2827.6 lbf/in^2
|
|
Sample 3 Elongation (350% Min)
|
Pass
|
|
Median of the Ultimate Tensile Values
|
2331.3 lbf/in^2
|
Test 3 of 6
DIME Test ID: 2019-06-06-11-3
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 06/21/2019
Date Tested: 06/13/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
UTM
|
no data
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.06 in
|
|
Sample 1 Tear Strength
|
166.7 lbf / in
|
|
Sample 2 Median Thickness
|
0.053 in
|
|
Sample 2 Tear Strength
|
169.8 lbf / in
|
|
Sample 3 Median Thickness
|
0.059 in
|
|
Sample 3 Tear Strength
|
169.5 lbf / in
|
|
Sample 4 Median Thickness
|
0.059 in
|
|
Sample 4 Tear Strength
|
169.5 lbf / in
|
|
Sample 5 Median Thickness
|
0.061 in
|
|
Sample 5 Tear Strength
|
147.5 lbf / in
|
|
Median of the Tear Strength Values
|
169.5 lb/in
|
Test 4 of 6
DIME Test ID: 2019-06-06-11-4
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 06/14/2019
Date Tested: 06/14/2019
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: lisa.dobeck@dot.ca.gov
Organization Phone: (916) 227-7291
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Test 5 of 6
DIME Test ID: 2019-06-06-11-5
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 06/21/2019
Date Tested: 06/13/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
5
|
|
UTM
|
no data
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.065 in
|
|
Sample 1 Tear Strength
|
169.2 lbf / in
|
|
Sample 2 Median Thickness
|
0.062 in
|
|
Sample 2 Tear Strength
|
177.4 lbf / in
|
|
Sample 3 Median Thickness
|
0.06 in
|
|
Sample 3 Tear Strength
|
166.7 lbf / in
|
|
Sample 4 Median Thickness
|
0.062 in
|
|
Sample 4 Tear Strength
|
161.3 lbf / in
|
|
Sample 5 Median Thickness
|
0.059 in
|
|
Sample 5 Tear Strength
|
169.5 lbf / in
|
|
Median of the Tear Strength Values
|
169.2 lb/in
|
Test 6 of 6
DIME Test ID: 2019-06-06-11-6
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 06/27/2019
Date Tested: 06/27/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
UTM
|
no data
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.06 in
|
|
Sample 1 Tear Strength
|
216.7 lbf / in
|
|
Sample 2 Median Thickness
|
0.061 in
|
|
Sample 2 Tear Strength
|
213.1 lbf / in
|
|
Sample 3 Median Thickness
|
0.059 in
|
|
Sample 3 Tear Strength
|
203.4 lbf / in
|
|
Median of the Tear Strength Values
|
213.1 lb/in
|