Print Report | Back to Sample Detail

Sample Record for 2019-05-31-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

DEA: No Project QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-05-31-11
TL Number from the TL Form: 908925
Sample Submitted By Organization: CT D01 - Field Laboratory
Sample Organization Contact: (707) 445-6373
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/31/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/31/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 1/2" HMA
From where was the sample collected: Manufacturer
Laboratory sample identification: 19-076
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Kernen

Material Information

HMA Type: Type A HMA
HMA Grading: 1/2 inch
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 7

DIME Test ID: 2019-05-31-11-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test: average of 2 tests 6.3, 6.26
Test Result Compliance: complies
Additional Comments When Verified:
Asphalt Binder Content 6.28 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 2 of 7

DIME Test ID: 2019-05-31-11-2
Test Method: AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Moisture Content 0.00 %
Percent Change 0 %

Test 3 of 7

DIME Test ID: 2019-05-31-11-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.436
Bulk Specific Gravity 2 2.435
Bulk Specific Gravity 3 2.432
Average Bulk Specific Gravity 2.434

Test 4 of 7

DIME Test ID: 2019-05-31-11-4
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.464

Test 5 of 7

DIME Test ID: 2019-05-31-11-5
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
Percent Air Voids 1.1 %
Percent Air Voids 2 1.2
Percent Air Voids 3 1.3
Percent Air Voids Average 1.2

Test 6 of 7

DIME Test ID: 2019-05-31-11-6
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test: 1/2 in rut depth at 13500 and 13100. Inflection point at 8646 and 8634
Test Result Compliance: does not comply
Additional Comments When Verified:
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A) 13500
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B) 13100
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A) 12.7 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B) 12.7 mm
Stripping Inflection Point (Wheel A) 8646
Stripping Inflection Point (Wheel B) 8634

Test 7 of 7

DIME Test ID: 2019-05-31-11-7
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 06/12/2019
Date Tested: 06/12/2019
Submitted By Organization: CT D01 - Field Laboratory
Organization Address: 1726 Albee St,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 445-6373
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Average Dry Tensile Strength 104 psi
Average Wet Tensile Strength 91 psi
Tensile Strength Ratio 0.88

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.