Print Report | Back to Sample Detail

Sample Record for 2019-04-29-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213720 DEA: 024H2004 EFIS: 0218000094 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-89-26.3/29.2
Work Description: PAVEMENT OVERLAY
Location Description: SHASTA COUNTY ABOUT 10 MILES NORTH OF BURNEY FROM 0.3 MILE NORTH OF CLARK CREEK ROAD TO LAKE BRITTON BRIDGE
Contractor Name: Hat Creek Construction
Contractor Address: 24339 Highway 89 N, Burney, CA 96013
Resident Engineer: TOFAEL ANWAR Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-04-29-13
TL Number from the TL Form: 001582
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/29/2019
Date that the sample was received by the laboratory/organization performing the testing: 04/29/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/8-inch Untreated Aggregate
From where was the sample collected: Source
Laboratory sample identification: D77857C_19-CHMA-0099
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Shaw pit

Material Information

Source Identification (SMARA or name of Pit): 91-25-0008::SHAW PIT
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: 19-1278.105A
The plant number: Unknown
A detailed description of where the material sample was collected: Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: JMF 19-04-S2
Lot number: 0
Sublot number: 0

Test Results

Test 1 of 2

DIME Test ID: 2019-04-29-13-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/30/2019
Date Tested: 04/30/2019
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Total mass of material in the sample 3260.2 grams
Cumulative mass retained on the 1 1/2 in. sieve 0 grams
Cumulative mass retained on the 1 in. sieve 0 grams
Cumulative mass retained on the 3/4 in. sieve 0 grams
Cumulative mass retained on the 1/2 in. sieve 0 grams
Cumulative mass retained on the 3/8 in. sieve 772 grams
Mass retained on the 1/4 in. sieve 2683 grams
Cumulative mass retained on the #4 sieve 3145 grams
Total sample mass passing the #4 sieve 115.2 grams
Total mass of fine material in the sample 115.2 grams
Cumulative mass retained on the #8 sieve 57.3 grams
Cumulative mass retained on the #16 sieve 66.7 grams
Cumulative mass retained on the #30 sieve 69.8 grams
Cumulative mass retained on the #50 sieve 71.8 grams
Cumulative mass retained on the #100 sieve 73.8 grams
Cumulative mass retained on the #200 sieve 76.6 grams
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 76.3 %
Cumulative percent passing the 1/4 in. sieve 17.7 %
Cumulative percent passing the #4 sieve 3.5 %
Cumulative percent passing the #8 sieve 1.8 %
Cumulative percent passing the #16 sieve 1.5 %
Cumulative percent passing the #30 sieve 1.4 %
Cumulative percent passing the #50 sieve 1.3 %
Cumulative percent passing the #100 sieve 1.3 %
Cumulative percent passing the #200 sieve 1.17 %

Test 2 of 2

DIME Test ID: 2019-04-29-13-2
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Verified Date: 06/28/2019
Date Tested: 06/27/2019
Submitted By Organization: CT HQ - Sacramento Aggregate Testing Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bang.d.nguyen@dot.ca.gov
Organization Phone: (916) 227-7204
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Size of aggregate being tested Coarse Aggregate
What type of solution was used? Sodium sulfate
What was the condition of the solution? Previously used
Number of immersion cycles performed 5
Coarse weighted average loss 5.2 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.