Print Report | Back to Sample Detail

Sample Record for 2019-04-25-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 210808 DEA: 020E0904 EFIS: 0200000016 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-5-R29.3/R31.1,R45.0/R45.8
Work Description: REPLACE BRIDGE, REALIGN ROADWAY AND SEISMIC RETROFIT
Location Description: IN SHASTA COUNTY ABT 8 MI N OF SHASTA LAKE CTY AND NEAR LAKEHEAD FRM TURNTABLE BAY O/C TO 0.1 MI N OF O'BRIEN SRRA & FRM 0.4 MI S TO 0.3 MI N OF DOG CREEK BRIDGE.
Contractor Name: GOLDEN STATE BRIDGE, INC.
Contractor Address: 3701 Mallard Drive, Benicia, CA 94510
Resident Engineer: Nathan Alexander Structure Rep.: Christopher S 'Chris' Brace

Sample Information

DIME Sample ID: 2019-04-25-15
TL Number from the TL Form: 001902
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/25/2019
Date that the sample was received by the laboratory/organization performing the testing: 04/25/2019
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4-inch Type A Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77852A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Northstate Asphalt

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: L190276
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 19-09-S1
Lot number: 0
Sublot number: 0
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2019-04-25-15-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/29/2019
Date Tested: 04/26/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 89.7 %
Cumulative percent passing the 3/8 in. sieve 65.5 %
Cumulative percent passing the 1/4 in. sieve 44.9 %
Cumulative percent passing the #4 sieve 36.9 %
Cumulative percent passing the #8 sieve 23 %
Cumulative percent passing the #16 sieve 15 %
Cumulative percent passing the #30 sieve 10.7 %
Cumulative percent passing the #50 sieve 7.8 %
Cumulative percent passing the #100 sieve 5.9 %
Cumulative percent passing the #200 sieve 4.62 %