Print Report | Back to Sample Detail

Sample Record for 2019-05-16-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213323 DEA: 081G4604 EFIS: 0816000005 QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-15-174.0/175.0
Work Description: COLD PLANE AND OVERLAY W/OGFC
Location Description: SAN BERNARDINO COUNTY FROM 2.5 MILES SOUTH OF BAILEY ROAD OVERCROSSING TO 1.2 MILES SOUTH OF NIPTON ROAD OVERCROSSING
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 38000 Monroe St, Indio, CA 92203
Resident Engineer: Darcy Davis Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-05-16-3
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Department Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 05/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/17/2019
The quantity of what the sample constitutes: 200 tons out
A brief description of the sample: 1" HMA-A R15 PG 64-28M (1.0% Lime Slurry)
From where was the sample collected: Source
Laboratory sample identification: 0281A-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Aggregate Industries Sloan, NV

Material Information

HMA Type: Type A HMA
HMA Grading: 1 inch
Lot number: Unknown
Sublot number: Unknown
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2019-05-16-3-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 05/21/2019
Date Tested: 05/18/2019
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: (909) 829-3029
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 4.25 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data