Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 212245 DEA: 024F8604 EFIS: 0213000043
QA Service Level: 1
DIST-CO-RTE-PM: 02-TRI-36-26.7/27.1
Work Description: ROADWAY REALIGNMENT AND NEW BRIDGE CONSTRUCTION
Location Description: TRINITY COUNTY ABOUT 9 MILES EAST OF FOREST GLEN FROM 0.6 MILE WEST TO 0.1 MILE WEST OF ROUTE 3
Contractor Name: Steelhead Constructors
Contractor Address: 2940 INNSBRUCK DRIVE, REDDING CA 96003
Resident Engineer: Joel Gasik Structure Rep.: Michael D Sears
DIME Sample ID: 2019-05-20-2
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Bay Area Field Office
Sample Organization Contact: (916) 284-6784
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/20/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/24/2019
The quantity of what the sample constitutes: 87
A brief description of the sample: F1554 Grade 55 Anchor Bolts
From where was the sample collected: Fabricator
Laboratory sample identification:
Structure unique identifier: 53-TRI
Structure name:
The fabricator/manufacturer/facility name: EDSCO Fasteners
Rocap Number(s):
Heat Number(s): 177429
Nut Mfg. Lot Number(s): 1-74983, 2-DDXL stamp 2HDH
Washer Mfg. Lot Number(s): 310803
Bolt Specification: F1554
Bolt Length(s): 4'-2"
Nut Specification: A194
Washer Specification: F436
Finish:
Diameter/Size: 2"
Bolt Mfg. Lot Number: NA
Rocap Test Requirement(s):
Lubricant Requirements(s): blue dye nut heat 3074438
DIME Test ID: 2019-05-20-2-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 1 | 177429 | 0.5 | 0.196 | 60778 | 89420 | 26.9 | Fred |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 f
|
DIME Test ID: 2019-05-20-2-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 2 | 177429 | 0.499 | 0.196 | 62157 | 89840 | 26.8 | Fred |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 f
|
DIME Test ID: 2019-05-20-2-3
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177429
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2 in
|
|
Bolt Length
|
50 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177429
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2 in
|
|
Bolt Length
|
50 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177429
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2 in
|
|
Bolt Length
|
50 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-6
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-7
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-9
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
2-DDXL STAMP 2HDH
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LBF 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-10
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
2-DDXL STAMP 2HDH
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LBF 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-11
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
2-DDXL STAMP 2HDH
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LBF 2H DH
|
|
Size
|
2 in
|
|
Gage Type
|
Pass
|
DIME Test ID: 2019-05-20-2-12
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177429
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2 in
|
|
Bolt Length
|
50 in
|
|
Measurement Average
|
3.69 mils
|
DIME Test ID: 2019-05-20-2-13
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177429
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2 in
|
|
Bolt Length
|
50 in
|
|
Measurement Average
|
4.65 mils
|
DIME Test ID: 2019-05-20-2-14
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
177429
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
2 in
|
|
Bolt Length
|
50 in
|
|
Measurement Average
|
4.41 mils
|
DIME Test ID: 2019-05-20-2-15
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.49 mils
|
DIME Test ID: 2019-05-20-2-16
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
4.68 mils
|
DIME Test ID: 2019-05-20-2-17
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.8 mils
|
DIME Test ID: 2019-05-20-2-18
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
301803
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.57 mils
|
DIME Test ID: 2019-05-20-2-19
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
301803
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.7 mils
|
DIME Test ID: 2019-05-20-2-20
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
301803
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
3.64 mils
|
DIME Test ID: 2019-05-20-2-21
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.98
|
|
Spacing
|
Ok
|
DIME Test ID: 2019-05-20-2-22
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
1-74983
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
LBF 2H
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.98
|
|
Spacing
|
Ok
|
DIME Test ID: 2019-05-20-2-23
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
2-DDXL STAMP 2HDH
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LBF 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.48
|
|
Spacing
|
Ok
|
DIME Test ID: 2019-05-20-2-24
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
2-DDXL STAMP 2HDH
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LBF 2H DH
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.18
|
|
Spacing
|
Ok
|
DIME Test ID: 2019-05-20-2-25
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
301803
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
36.6
|
|
Spacing
|
Ok
|
DIME Test ID: 2019-05-20-2-26
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 06/06/2019
Date Tested: 06/06/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
301803
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
WS
|
|
Size
|
2 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
36.6
|
|
Spacing
|
Ok
|
