Print Report | Back to Sample Detail

Sample Record for 2019-05-02-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213846 DEA: 041J5614 EFIS: 0419000117 QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-101-0.0/6.7
Work Description: Barrier modifications, overhead signs, freeway lighting and electronic toll system components
Location Description: SANTA CLARA AND SAN MATEO COUNTIES IN PALO ALTO AND REDWOOD CITY FROM 0.3 MILE NORTH OF SAN ANTONIO ROAD TO WHIPPLE AVENUE OVERCROSSING
Contractor Name: KIEWIT INFRASTRUCTURE WEST CO
Contractor Address: 390 Bridge Parkway Suite 210, Redwood City, CA 94065
Resident Engineer: Doug Inori Structure Rep.: Tyler Pinell

Sample Information

DIME Sample ID: 2019-05-02-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (916) 227-7253
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/02/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/08/2019
The quantity of what the sample constitutes: 3
A brief description of the sample: A325 Bolt
From where was the sample collected: Manufacturer
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales

Material Information

Rocap Number(s):
Heat Number(s): 20391740 532619
Nut Mfg. Lot Number(s):
Washer Mfg. Lot Number(s): D1862
Bolt Specification: A325 MG
Bolt Length(s): 2.25"
Nut Specification: NA
Washer Specification: F436 MG
Finish: MG
Diameter/Size: 1"
Bolt Mfg. Lot Number: BM0196
Rocap Test Requirement(s):
Lubricant Requirements(s):
Test results on following page(s): 5

Test Results

Test 1 of 5

DIME Test ID: 2019-05-02-13-1
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/13/2019
Date Tested: 05/10/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA SL
Size 1 in
Bolt Length 2.25 in
Pitch Diameter .930 in
Pitch Diameter 2nd .930 in

Test 2 of 5

DIME Test ID: 2019-05-02-13-2
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/13/2019
Date Tested: 05/10/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA SL
Size 1 in
Bolt Length 2.25 in
Measurement Average 4.54 mils

Test 3 of 5

DIME Test ID: 2019-05-02-13-3
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/13/2019
Date Tested: 05/10/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D1862
Finish Coating ASTM B695 - Mech Galv
Product Markings F436 P
Size 1 in
Bolt Length no data in
Measurement Average 3.07 mils

Test 4 of 5

DIME Test ID: 2019-05-02-13-4
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/13/2019
Date Tested: 05/10/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number BM0196
Finish Coating ASTM B695 - Mech Galv
Product Markings A325 USA SL
Size 1 in
Bolt Length 2.25 in
Hardness Reading Scale C Scale
Hardness Reading Average 28.45
Spacing Ok

Test 5 of 5

DIME Test ID: 2019-05-02-13-5
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/13/2019
Date Tested: 05/10/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: paul.lukkarila@dot.ca.gov
Organization Phone: 916-227-7257
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No. 1A
Rocap Number no data
Heat Number(s) no data
Mfg. Lot Number D1862
Finish Coating ASTM B695 - Mech Galv
Product Markings F436 P
Size 1 in
Bolt Length no data in
Hardness Reading Scale C Scale
Hardness Reading Average 40.35
Spacing Ok