Sample Record for 2019-05-06-6
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213846 DEA: 041J5614 EFIS: 0419000117
QA Service Level: 1
DIST-CO-RTE-PM: 04-SM-101-0.0/6.7
Work Description: Barrier modifications, overhead signs, freeway lighting and electronic toll system components
Location Description: SANTA CLARA AND SAN MATEO COUNTIES IN PALO ALTO AND REDWOOD CITY FROM 0.3 MILE NORTH OF SAN ANTONIO ROAD TO WHIPPLE AVENUE OVERCROSSING
Contractor Name: KIEWIT INFRASTRUCTURE WEST CO
Contractor Address: 390 Bridge Parkway Suite 210, Redwood City, CA 94065
Resident Engineer: Doug Inori Structure Rep.: Tyler Pinell
Sample Information
DIME Sample ID: 2019-05-06-6
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - QASI Los Angeles Field Office
Sample Organization Contact: (858) 285-5797
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 05/06/2019
Date that the sample was received by the laboratory/organization performing the testing: 05/13/2019
The quantity of what the sample constitutes: 1 Assembly
A brief description of the sample: Galvanized / Plain Fastener Assembly
From where was the sample collected: Distributor
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Universal Industrial Sales
Material Information
Rocap Number(s):
Heat Number(s): 3084906
Nut Mfg. Lot Number(s): Lot XC02 - HT MM17108958 HDG / Lot WWT2 - HT 188452 Plain
Washer Mfg. Lot Number(s): Lot 118307 - HT C82082
Bolt Specification: F1554-55
Bolt Length(s): 5'
Nut Specification: A563- Grade DH
Washer Specification: F436
Finish: Galvanized / Plain
Diameter/Size: 3"
Bolt Mfg. Lot Number:
Rocap Test Requirement(s):
Lubricant Requirements(s): Blue Wax Dye
Test Results
Test 1 of 9
DIME Test ID: 2019-05-06-6-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 1 | 3084906 | 0.501 | 0.197 | 66059 | 92530 | 25 | Fred |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 f
|
Test 2 of 9
DIME Test ID: 2019-05-06-6-2
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | 2 | 3084906 | 0.501 | 0.197 | 65621 | 93120 | 25.5 | Fred |
| |
|
UTM
|
67KIP
|
|
Temperature
|
72 f
|
Test 3 of 9
DIME Test ID: 2019-05-06-6-3
Test Method: ASME B1.2-83r01: (Pitch Diameter) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Pitch Diameter)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
3084906
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
no data in
|
|
Bolt Length
|
60 in
|
|
Pitch Diameter
|
2.860 in
|
|
Pitch Diameter 2nd
|
2.824 in
|
Test 4 of 9
DIME Test ID: 2019-05-06-6-4
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
3084906
|
|
Mfg. Lot Number
|
no data
|
|
Finish Coating
|
Plain and ASTM F2329 - Hot Dip
|
|
Product Markings
|
YELLOW PAINT
|
|
Size
|
3 in
|
|
Bolt Length
|
60 in
|
|
Measurement Average
|
10.7 mils
|
Test 5 of 9
DIME Test ID: 2019-05-06-6-5
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
WWT2
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
DH 2H D/N
|
|
Size
|
3 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
0 mils
|
Test 6 of 9
DIME Test ID: 2019-05-06-6-6
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
WWT2
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
DH 2H D/N
|
|
Size
|
3 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
25.1
|
|
Spacing
|
Ok
|
Test 7 of 9
DIME Test ID: 2019-05-06-6-7
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
XC02
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
DH D/N
|
|
Size
|
3 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
8.13 mils
|
Test 8 of 9
DIME Test ID: 2019-05-06-6-8
Test Method: ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
LOT 118307 - HT C82082
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
B
|
|
Size
|
3 in
|
|
Bolt Length
|
no data in
|
|
Measurement Average
|
6.01 mils
|
Test 9 of 9
DIME Test ID: 2019-05-06-6-9
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 05/21/2019
Date Tested: 05/21/2019
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
LOT 118307 - HT C82082
|
|
Finish Coating
|
ASTM F2329 - Hot Dip
|
|
Product Markings
|
B
|
|
Size
|
3 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
43.75
|
|
Spacing
|
Ok
|
