Sample Record for 2017-04-03-13
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213793 DEA: 060W7004 EFIS: 0617000283
QA Service Level: 1
DIST-CO-RTE-PM: 06-FRE-33-24.3/R29.0,R39.9/44.5
Work Description: COLD PLANE AC PAVEMENT, PLACE HMA RESURFACING.
Location Description: FRESNO COUNTY ABOUT 7.8 MILES NORTH OF COALINGA FROM NORTH JUNCTION ROUTE 198 TO SOUTH JUNCTION ROUTE 33/5 AND FROM 0.1 MILE NORTH OF NORTH JUNCTION ROUTE 33/5 TO EL PROGRESSIO ROAD
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: 398 SUNRISE TERRACE, ARROYO GRANDE CA 93420
Resident Engineer: Michael Stavropoulos Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2017-04-03-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 04/03/2017
Date that the sample was received by the laboratory/organization performing the testing: 04/03/2017
The quantity of what the sample constitutes: JMF HMA Design Data (Dispute Resolution)
A brief description of the sample: Bin #4 RD untreated (Dispute Resolution)
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM-Avenal
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-10-0006::AVENAL AGGREGATES
The fabricator's/manufacturer's product name for the sample: SPM-Avenal
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: fine
The concrete mix design number: Unknown
Lot number: Unknown
Sublot number: Unknown
Aggregate Mix Number:
Test Results
Test 1 of 1
DIME Test ID: 2017-04-03-13-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 05/01/2019
Date Tested: 04/03/2017
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard, Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: JMF Renewal Dispute Resolution - HQ is handling the dispute by performing a full JMF verifcation through the Aggregate and HMA Labs. JMF served Project ID: 0617000283.
Test Result Compliance:
Additional Comments When Verified:
|
What type of gradation is being tested?
|
HMA Gradation
|
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/2 in. sieve
|
100 %
|
|
Cumulative percent passing the 3/8 in. sieve
|
100 %
|
|
Cumulative percent passing the 1/4 in. sieve
|
100 %
|
|
Cumulative percent passing the #4 sieve
|
98 %
|
|
Cumulative percent passing the #8 sieve
|
81 %
|
|
Cumulative percent passing the #16 sieve
|
62 %
|
|
Cumulative percent passing the #30 sieve
|
48 %
|
|
Cumulative percent passing the #50 sieve
|
38 %
|
|
Cumulative percent passing the #100 sieve
|
27 %
|
|
Cumulative percent passing the #200 sieve
|
20.3 %
|
