Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213255 DEA: 081E5814 EFIS: 0816000072
QA Service Level: 1
DIST-CO-RTE-PM: 08-SBD-95-40.0/40.4
Work Description: WIDEN SHOULDERS AND PLACE GROUND-IN RUMBLE STRIP
Location Description: SAN BERNARDINO COUNTY NEAR NEEDLES FROM 2.7 MILES TO 3.1 MILES NORTH OF HAVASU LAKE ROAD
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 38000 MONROE STREET, INDIO, CA 92203
Resident Engineer: DARCY DAVIS Structure Rep.: Unknown
DIME Sample ID: 2019-04-16-23
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 04/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 04/17/2019
The quantity of what the sample constitutes: 299.5 tons out
A brief description of the sample: 3/4" RHMA-G PG 64-16RB (1.0% Lime Slurry)
From where was the sample collected: Source
Laboratory sample identification: 0237A-19
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite Indio
DIME Test ID: 2019-04-16-23-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 04/23/2019
Date Tested: 04/19/2019
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
What temperature unit is used?
|
Fahrenheit
|
Test procedure used?
|
Method A
|
Mass of HMA Sample prior to ignition
|
no data
|
Corrected Asphalt Binder Content
|
7.00 %
|
Mass Loss
|
no data
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
Moisture Content
|
no data
|
Temperature Compensation Factor
|
no data
|
Test Temperature
|
no data
|