Print Report | Back to Sample Detail

Sample Record for 2019-03-13-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-03-13-15
TL Number from the TL Form: D5
Sample Submitted By Organization: CT D05 - San Luis Obispo Field Laboratory
Sample Organization Contact: (559) 230-3109
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/13/2019
Date that the sample was received by the laboratory/organization performing the testing: 03/27/2019
The quantity of what the sample constitutes: 1/4 of Section 39 JMF verification samples
A brief description of the sample: Boxes of HMA, Cans of Asphalt and LAS
From where was the sample collected: Other
Laboratory sample identification: 19-J-015
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Papich Paso Robles

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 5

DIME Test ID: 2019-03-13-15-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 04/22/2019
Date Tested: 04/19/2019
Submitted By Organization: CT D05 - San Luis Obispo Field Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Asphalt Binder Content 5.09 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 2 of 5

DIME Test ID: 2019-03-13-15-2
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/22/2019
Date Tested: 04/17/2019
Submitted By Organization: CT D05 - San Luis Obispo Field Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Method Performed no data
Mass of container filled with water 7403.0 grams
Mass of oven-dry sample in air for Sample 1 2658.0 grams
Mass of container filled with the sample and water for Sample 1 8980.0 grams
Temperature of Water 77 °F
Specific Gravity for Sample 1 2.456
Theoretical maximum density at 25°C (77°F) no data

Test 3 of 5

DIME Test ID: 2019-03-13-15-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/22/2019
Date Tested: 04/18/2019
Submitted By Organization: CT D05 - San Luis Obispo Field Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk Specific Gravity 2.392
Bulk Specific Gravity 2 2.395
Bulk Specific Gravity 3 2.396
Average Bulk Specific Gravity 2.394

Test 4 of 5

DIME Test ID: 2019-03-13-15-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/22/2019
Date Tested: 04/19/2019
Submitted By Organization: CT D05 - San Luis Obispo Field Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Percent Air Voids 2.6 %
Percent Air Voids 2 2.5 %
Percent Air Voids 3 2.4 %
Percent Air Voids Average 2.5 %

Test 5 of 5

DIME Test ID: 2019-03-13-15-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 04/22/2019
Date Tested: 03/13/2019
Submitted By Organization: CT D05 - San Luis Obispo Field Laboratory
Organization Address: 50 Higuera Street,
Organization City: San Luis Obispo
Organization State: CA
Organization Zipcode: 93401
Organization Email: doug.lambert@dot.ca.gov
Organization Phone: (559) 230-3109
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Average Dry Tensile Strength 284 psi
Average Wet Tensile Strength 204 psi
Tensile Strength Ratio 72

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.