Print Report | Back to Sample Detail

Sample Record for 2019-01-04-72

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-01-04-72
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Control
Type of Material: Hot Mix Asphalt
Sample Taken Date: 01/04/2019
Date that the sample was received by the laboratory/organization performing the testing: 01/04/2019
The quantity of what the sample constitutes: JMF
A brief description of the sample: 3/4 HMA Type A
From where was the sample collected: Source
Laboratory sample identification: TEM34SPLA
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM-Avenal

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number:
Sublot number:
HMA Mix Number:

Test Results

Test 1 of 4

DIME Test ID: 2019-01-04-72-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 04/12/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd., Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: HMA T-308
Test Result Compliance:
Additional Comments When Verified:
Asphalt Binder Content 5.00 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 2 of 4

DIME Test ID: 2019-01-04-72-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/12/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd., Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: HMA T-275
Test Result Compliance:
Additional Comments When Verified:
Bulk Specific Gravity 2.327
Bulk Specific Gravity 2 2.331
Bulk Specific Gravity 3 2.326
Average Bulk Specific Gravity 2.328

Test 3 of 4

DIME Test ID: 2019-01-04-72-3
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/12/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd., Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: HMA T-209
Test Result Compliance:
Additional Comments When Verified:
Number of tests 1
Mass Determination Water
Specific Gravity for Sample 1 2.427
Theoretical maximum density at 25°C (77°F) no data

Test 4 of 4

DIME Test ID: 2019-01-04-72-4
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/12/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Sacramento Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd., Room 225,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test: HMA T-269
Test Result Compliance:
Additional Comments When Verified:
Percent Air Voids 4.1 %
Percent Air Voids 2 3.9 %
Percent Air Voids 3 4.1 %
Percent Air Voids Average 4.1 %