Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 212816 DEA: 020H6304 EFIS: 0215000063
QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-139-6.2/7.3
Work Description: ROADWAY EXCAVATION, AGGREGATE BASE, HOT MIX ASPHALT, GUARDRAIL
Location Description: LASSEN COUNTY ABOUT 6 MILES NORTH OF SUSANVILLE FROM 1.0 MILE SOUTH TO 0.1 MILE SOUTH OF ANTELOPE RADIO STREET
Contractor Name: Knife River Construction
Contractor Address: 1764 Skyway, CHICO, CA 95928
Resident Engineer: John Yolton Structure Rep.: Unknown
DIME Sample ID: 2019-03-07-18
TL Number from the TL Form:
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Quality Control
Type of Material: Asphalt Binder
Sample Taken Date: 03/07/2019
Date that the sample was received by the laboratory/organization performing the testing: 03/07/2019
The quantity of what the sample constitutes: Mix Design
A brief description of the sample: Modified Asphalt Binder
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Valero - Benicia, CA
Performance Grade: PG 64-28 M
Modified: Yes
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier:
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2019-03-07-18-1
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 04/10/2019
Date Tested: 03/07/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2019-03-07-18-2
Test Method: AASHTO T315-12: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 04/10/2019
Date Tested: 03/07/2019
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Phase
|
RTFO residue
|
|
Phase Angle (δ) (for the 10 cycles)
|
40.0 degree
|
|
Dynamic Shear, G*/sin(δ)
|
3.84 kPa
|
|
(G*) x sin(δ)=
|
no data
|
