Print Report | Back to Sample Detail

Sample Record for 2019-03-16-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212889 DEA: 073009U4 EFIS: 0714000238 QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-110-R0.7/24.1
Work Description: REPLACE CONCRETE PAVEMENT, COLD PLANE AND PLACE HMA PAVEMENT.
Location Description: LOS ANGELES COUNTY IN AND NEAR LOS ANGELES AND CARSON FROM GAFFEY STREET TO 0.1 MILE SOUTH OF COLLEGE STREET OVERCROSSING
Contractor Name: All American Asphalt
Contractor Address: 400 E. 6th St., Corona, CA 92879
Resident Engineer: Thang Ton Structure Rep.: Ho, Quan

Sample Information

DIME Sample ID: 2019-03-16-3
TL Number from the TL Form:
Sample Submitted By Organization: CT - Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/16/2019
Date that the sample was received by the laboratory/organization performing the testing: 03/25/2019
The quantity of what the sample constitutes: 20 boxes
A brief description of the sample: 3/4" HMA-A R15 PG64-10
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: All American Asphalt-Irwindale

Material Information

HMA Type: Type A HMA
HMA Grading: 3/4 inch
Lot number: Unknown
Sublot number: Unknown

Test Results

Test 1 of 16

DIME Test ID: 2019-03-16-3-1
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/05/2019
Date Tested: 03/25/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Method Performed no data
Mass of container filled with water 7340.0 grams
Mass of oven-dry sample in air for Sample 1 2519.0 grams
Mass of container filled with the sample and water for Sample 1 8855.0 grams
Temperature of Water 25 °F
Specific Gravity for Sample 1 2.507

Test 2 of 16

DIME Test ID: 2019-03-16-3-2
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 04/05/2019
Date Tested: 03/27/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Bulk Specific Gravity 2.415
Bulk Specific Gravity 2 2.405
Bulk Specific Gravity 3 2.420
Average Bulk Specific Gravity 2.413

Test 3 of 16

DIME Test ID: 2019-03-16-3-3
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/05/2019
Date Tested: 03/27/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Percent Air Voids 3.7 %
Percent Air Voids 2 4.1 %
Percent Air Voids 3 3.5 %
Percent Air Voids Average 3.8 %

Test 4 of 16

DIME Test ID: 2019-03-16-3-4
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 04/05/2019
Date Tested: 03/26/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Asphalt Binder Content 4.65 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 5 of 16

DIME Test ID: 2019-03-16-3-5
Test Method: AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)
Verified Date: 04/05/2019
Date Tested: 03/28/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Average Dry Tensile Strength 245 psi
Average Wet Tensile Strength 184 psi
Tensile Strength Ratio 75

Test 6 of 16

DIME Test ID: 2019-03-16-3-6
Test Method: AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)
Verified Date: 04/05/2019
Date Tested: 03/28/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel A) 15000
Specified minimum number of passes at ½” rut depth, or number of passes at ½” rut depth if applicable (Wheel B) 15000
Impression at specified number of passes, or specified maximum impression if applicable (Wheel A) 3.22 mm
Impression at specified number of passes, or specified maximum impression if applicable (Wheel B) 1.97 mm
Stripping Inflection Point (Wheel A) >10000
Stripping Inflection Point (Wheel B) >10000

Test 7 of 16

DIME Test ID: 2019-03-16-3-7
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 04/05/2019
Date Tested: 03/26/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Asphalt Binder Content 4.65 %
Correction Factor (Percent by mass of HMA Specimen) no data

Test 8 of 16

DIME Test ID: 2019-03-16-3-8
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/05/2019
Date Tested: 03/25/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Method Performed no data
Mass of container filled with water 7340.0 grams
Mass of oven-dry sample in air for Sample 1 2519.0 grams
Mass of container filled with the sample and water for Sample 1 8855.0 grams
Temperature of Water 25 °F
Specific Gravity for Sample 1 2.507

Test 9 of 16

DIME Test ID: 2019-03-16-3-9
Test Method: AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content)
Verified Date: 04/05/2019
Date Tested: 03/27/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Moisture Content 0.00 %
Percent Change 0 %

Test 10 of 16

DIME Test ID: 2019-03-16-3-10
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/05/2019
Date Tested: 03/25/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.507

Test 11 of 16

DIME Test ID: 2019-03-16-3-11
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/05/2019
Date Tested: 03/25/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.507

Test 12 of 16

DIME Test ID: 2019-03-16-3-12
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/08/2019
Date Tested: 03/25/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Specific Gravity for Sample 1 2.507

Test 13 of 16

DIME Test ID: 2019-03-16-3-13
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 07/03/2019
Date Tested: 03/27/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Percent Air Voids no data
Percent Air Voids 2 0
Percent Air Voids 3 0
Percent Air Voids Average 0

Test 14 of 16

DIME Test ID: 2019-03-16-3-14
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 05/08/2019
Date Tested: 03/25/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 1
Mass Determination Air
Method Performed no data
Mass of container filled with water 7340.0 grams
Mass of oven-dry sample in air for Sample 1 2519.0 grams
Mass of container filled with the sample and water for Sample 1 8855.0 grams
Temperature of Water 25 °F
Specific Gravity for Sample 1 2.507

Test 15 of 16

DIME Test ID: 2019-03-16-3-15
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 04/08/2019
Date Tested: 03/29/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Percent Air Voids 3.7 %
Percent Air Voids 2 4.1 %
Percent Air Voids 3 3.5 %
Percent Air Voids Average 3.8 %

Test 16 of 16

DIME Test ID: 2019-03-16-3-16
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 04/10/2019
Date Tested: 03/27/2019
Submitted By Organization: CT - Southern Regional Laboratory
Organization Address: 13970 Victoria St,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 213-792-4794
General Comments for this Test:
Additional Comments When Verified:
Number of tests 3
Mass Determination Air
Specific Gravity for Sample 1 2.507
Specific Gravity for Sample 2 2.507
Specific Gravity for Sample 3 2.507
Average Specific Gravity 2.507

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.