*Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Sample Record for 2019-01-04-50


Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Contractor Address:
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-01-04-50
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Control
Type of Material: Reclaimed Asphalt Pavement
Sample Taken Date: 01/04/2019
Date that the sample was received by the laboratory/organization performing the testing:
The quantity of what the sample constitutes: JMF
A brief description of the sample: 1/2 Inch HMA-SP RAP
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:

Material Information

RAP Source: Stockpile
Aggregate Size:
Aggregate Source:
RAP Stockpile:
Stockpile Size (tons):

Test Results

Test 1 of 2

DIME Test ID: 2019-01-04-50-1
Test Method: AASHTO T30-15: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)
Verified Date: 04/05/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: RAP Sample 3A T-30
Additional Comments When Verified:
Cumulative percent passing the 2 in. sieve 100 %
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 100 %
Cumulative percent passing the 3/8 in. sieve 99.6 %
Cumulative percent passing the 1/4 in. sieve 99.6 %
Cumulative percent passing the #4 sieve 76 %
Cumulative percent passing the #8 sieve 54.3 %
Cumulative percent passing the #16 sieve 39 %
Cumulative percent passing the #30 sieve 29.4 %
Cumulative percent passing the #50 sieve 20.9 %
Cumulative percent passing the #100 sieve 13.2 %
Cumulative percent passing the #200 sieve 8.9 %

Test Results

Test 2 of 2

DIME Test ID: 2019-01-04-50-2
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Asphalt Binder Content)
Verified Date: 04/05/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Blvd
Test General Comments: RAP Sample 3A T-308
Additional Comments When Verified:
Test procedure used? Method A
Asphalt Binder Content 6.58 %
Mass of HMA prior to ignition no data
Mass of aggregate remaining after ignition no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Test Temperature no data