Print Report | Back to Sample Detail

Sample Record for 2019-03-05-7

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213078 DEA: 081G6204 EFIS: 0816000031 QA Service Level: 1
DIST-CO-RTE-PM: 08-RIV-10,86-Var
Work Description: COLD PLANE, RHMA-G OVERLAY, REPLACE PRECAST SLAB AND LOCALIZED DIG-OUT
Location Description: IN RIVERSIDE COUNTY AT VARIOUS LOCATIONS
Contractor Name: HAZARD CONSTRUCTION COMPANY
Contractor Address: 6465 Marindustry Dr., San Diego, CA 92121
Resident Engineer: Peter Koury Structure Rep.: Arvindkumar Patel

Sample Information

DIME Sample ID: 2019-03-05-7
TL Number from the TL Form:
Sample Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Sample Organization Contact: 213-792-4794
Type of Sample: Acceptance
Type of Material: Hot Mix Asphalt
Sample Taken Date: 03/05/2019
Date that the sample was received by the laboratory/organization performing the testing: 03/06/2019
The quantity of what the sample constitutes: 4 boxes 276 tons out
A brief description of the sample: 1/2" RHMA G PG 64-16RB 1.0% Lime Slurry
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: CCA-Coachella

Material Information

HMA Type: RHMA-G
HMA Grading: 1/2 inch
Lot number: 4
Sublot number: 2
HMA Mix Number:

Test Results

Test 1 of 1

DIME Test ID: 2019-03-05-7-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 03/12/2019
Date Tested: 03/07/2019
Submitted By Organization: CT D08 - Fontana Southern Regional Laboratory
Organization Address: 13970 Victoria Street,
Organization City: Fontana
Organization State: CA
Organization Zipcode: 92336
Organization Email: jose.guzman@dot.ca.gov
Organization Phone: 9098293029
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What temperature unit is used? Fahrenheit
Test procedure used? Method A
Mass of HMA Sample prior to ignition no data
Corrected Asphalt Binder Content 7.36 %
Mass Loss no data
Correction Factor (Percent by mass of HMA Specimen) no data
Moisture Content no data
Temperature Compensation Factor no data
Test Temperature no data