Print Report | Back to Sample Detail

Sample Record for 2019-01-04-13

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 66667 DEA: JMFPP EFIS: 0019000043 QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2019-01-04-13
TL Number from the TL Form:
Sample Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Sample Organization Contact: (916) 227-7302
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 01/04/2019
Date that the sample was received by the laboratory/organization performing the testing: 01/04/2019
The quantity of what the sample constitutes: JMF
A brief description of the sample: 3/4 HMA Type A
From where was the sample collected: Source
Laboratory sample identification: TEM34SPLA
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SPM-Avenal

Material Information

Source Identification (SMARA or name of Pit): 91-10-0006::AVENAL AGGREGATES
The fabricator's/manufacturer's product name for the sample: 3/4 HMA Type A
The fabricator/manufacturer designation for the sample: JMF virgin aggreate
The plant number: 1
A detailed description of where the material sample was collected: Stockpile @ Plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: TEM34SPLA
Lot number: 1
Sublot number: 1

Test Results

Test 1 of 2

DIME Test ID: 2019-01-04-13-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 02/13/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 62 %
Cumulative percent passing the 3/8 in. sieve 3 %
Cumulative percent passing the 1/4 in. sieve 3 %
Cumulative percent passing the #4 sieve 1 %
Cumulative percent passing the #8 sieve 1 %
Cumulative percent passing the #16 sieve 0.5 %
Cumulative percent passing the #30 sieve 0 %
Cumulative percent passing the #50 sieve 0 %
Cumulative percent passing the #100 sieve 0 %
Cumulative percent passing the #200 sieve 0 %

Test 2 of 2

DIME Test ID: 2019-01-04-13-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 02/13/2019
Date Tested: 01/04/2019
Submitted By Organization: CT HQ - Hot Mix Asphalt Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: guadalupe.magana@dot.ca.gov
Organization Phone: (916) 227-7302
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 62 %
Cumulative percent passing the 3/8 in. sieve 3 %
Cumulative percent passing the 1/4 in. sieve 3 %
Cumulative percent passing the #4 sieve 1 %
Cumulative percent passing the #8 sieve 1 %
Cumulative percent passing the #16 sieve 0.5 %
Cumulative percent passing the #30 sieve 0 %
Cumulative percent passing the #50 sieve 0 %
Cumulative percent passing the #100 sieve 0 %
Cumulative percent passing the #200 sieve 0 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.