Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 66667 DEA: JMFPP EFIS: 0019000043
QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for submitting Sample information for JMF Prequalification Program.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2019-01-04-9
TL Number from the TL Form:
Sample Submitted By Organization: Sierra Pacific Materials
Sample Organization Contact: (805) 423-2327
Type of Sample: Quality Control
Type of Material: Asphalt Binder
Sample Taken Date: 01/04/2019
Date that the sample was received by the laboratory/organization performing the testing: 01/04/2019
The quantity of what the sample constitutes: JMF
A brief description of the sample: PG64-10
From where was the sample collected: Other
Laboratory sample identification: TEM34SPLA
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: San Joaquin Refinery
Performance Grade: PG64-10
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Certified Asphalt Supplier:
Multigrade:
Multigrade Type:
Asphalt Binder Mix Number:
DIME Test ID: 2019-01-04-9-1
Test Method: AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)
Verified Date: 02/01/2019
Date Tested: 01/04/2019
Submitted By Organization: Sierra Pacific Materials
Organization Address: 45315 Lost Hills Road,
Organization City: Coalinga
Organization State: CA
Organization Zipcode: 93210
Organization Email: mdavis@papichconstruction.com
Organization Phone: (805) 423-2327
General Comments for this Test: 3512 shows SpG as 1.0268
Test Result Compliance:
Additional Comments When Verified:
DIME Test ID: 2019-01-04-9-2
Test Method: AASHTO T315-12: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Verified Date: 02/01/2019
Date Tested: 01/04/2019
Submitted By Organization: Sierra Pacific Materials
Organization Address: 45315 Lost Hills Road,
Organization City: Coalinga
Organization State: CA
Organization Zipcode: 93210
Organization Email: mdavis@papichconstruction.com
Organization Phone: (805) 423-2327
General Comments for this Test: 3512 gives test result as 1.408
Test Result Compliance:
Additional Comments When Verified:
|
Phase
|
RTFO residue
|
|
Phase Angle (δ) (for the 10 cycles)
|
1.4 degree
|
|
Dynamic Shear, G*/sin(δ)
|
0.00 kPa
|
|
(G*) x sin(δ)=
|
no data
|
