Print Report | Back to Sample Detail

Sample Record for 2018-06-04-34

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212741 DEA: 020E1804 EFIS: 0200000022 QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-89-29.8/30.2
Work Description: BRIDGE REPLACEMENT
Location Description: PLUMAS COUNTY NEAR CANYON DAM FROM 0.2 MILE SOUTH TO 0.3 MILE NORTH OF LAKE ALMANOR SPILLWAY
Contractor Name: Q&D CONSTRUCTION, INC.
Contractor Address: P.O Box 10865, Reno, NV 89510
Resident Engineer: Ryan Johnson Structure Rep.: Matt Crete

Sample Information

DIME Sample ID: 2018-06-04-34
TL Number from the TL Form: 894777
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 06/04/2018
Date that the sample was received by the laboratory/organization performing the testing: 06/05/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined, Treated Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77438
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sierra Cascade Aggregate and Asphalt Products

Material Information

Source Identification (SMARA or name of Pit): 91-32-0002::CHESTER PIT
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: 18-1932.49
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 18-04-S3
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2018-06-04-34-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 01/18/2019
Date Tested: 06/06/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 98.8 %
Cumulative percent passing the 1/2 in. sieve 72.2 %
Cumulative percent passing the 3/8 in. sieve 63.1 %
Cumulative percent passing the 1/4 in. sieve 52.6 %
Cumulative percent passing the #4 sieve 43.2 %
Cumulative percent passing the #8 sieve 25.3 %
Cumulative percent passing the #16 sieve 16.8 %
Cumulative percent passing the #30 sieve 12 %
Cumulative percent passing the #50 sieve 8.8 %
Cumulative percent passing the #100 sieve 6.4 %
Cumulative percent passing the #200 sieve 4.63 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.