Print Report | Back to Sample Detail

Sample Record for 2018-05-31-18

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212784 DEA: 023H1504 EFIS: 0217000064 QA Service Level: 1
DIST-CO-RTE-PM: 02-LAS-299-0.0/4.7
Work Description: AC OVERLAY, REPLACE ASPHALT CONCRETE SURFACING AND GUARDRAIL.
Location Description: LASSEN COUNTY NEAR MCARTHUR FROM SHASTA COUNTY LINE TO 4.0 MILES WEST OF MUCK VALLEY HYDRO ROAD.
Contractor Name: J.F. SHEA CONSTRUCTION, INC.
Contractor Address: 17400 Clearcreek Road, Redding, CA 96001
Resident Engineer: Tofael Anwar Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-05-31-18
TL Number from the TL Form: 736683
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/31/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/31/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined Treated Virgin Type A Aggregate
From where was the sample collected: Source
Laboratory sample identification: D77434
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Fawndale Rock and Asphalt

Material Information

Source Identification (SMARA or name of Pit): 91-45-0017::FAWNDALE ROCK QUARRY
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 18-03-M1
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2018-05-31-18-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 01/04/2019
Date Tested: 06/01/2018
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99.4 %
Cumulative percent passing the 1/2 in. sieve 77.2 %
Cumulative percent passing the 3/8 in. sieve 62.7 %
Cumulative percent passing the 1/4 in. sieve 48.2 %
Cumulative percent passing the #4 sieve 40.7 %
Cumulative percent passing the #8 sieve 24.5 %
Cumulative percent passing the #16 sieve 15.2 %
Cumulative percent passing the #30 sieve 9.9 %
Cumulative percent passing the #50 sieve 6.8 %
Cumulative percent passing the #100 sieve 5 %
Cumulative percent passing the #200 sieve 3.93 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.