Print Report | Back to Sample Detail

Sample Record for 2018-06-29-24

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212408 DEA: 09350804 EFIS: 0900020055 QA Service Level: 1
DIST-CO-RTE-PM: 09-MNO-395-80.6/84.1
Work Description: CONSTRUCT PULVERIZED ROADBED, HMA AND ANCHORED WIRE MESH SYSTEM.
Location Description: MONO COUNTY NEAR BRIDGEPORT FROM BUCKEYE ROAD TO 2.9 MILES SOUTH OF SWAUGER CANYON ROAD
Contractor Name: PAPICH CONSTRUCTION COMPANY, INC.
Contractor Address: PO BOX 2210, PISMO BEACH PO BOX 2210 CA 9344
Resident Engineer: Lee Scotese Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-06-29-24
TL Number from the TL Form:
Sample Submitted By Organization: CT D09 - Field Laboratory
Sample Organization Contact: (760) 872-5211
Type of Sample: Quality Assurance
Type of Material: Asphalt Binder
Sample Taken Date: 06/29/2018
Date that the sample was received by the laboratory/organization performing the testing: 07/02/2018
The quantity of what the sample constitutes: 1 day
A brief description of the sample: Load 16 2628 tons
From where was the sample collected: Source
Laboratory sample identification:
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Road and Highway Builders

Material Information

Performance Grade: PG-58-34M
Modified:
Lot number:
Sublot number:
Tank number:
Time of sample:
HMA Supplier:
Asphalt Binder Supplier:
Multigrade:
Multigrade Type:

Test Results

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
2018-06-29-24-1AASHTO T313-16: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)12/14/201801/25/2019Lee ScoteseCT - Southern Regional Laboratory
2018-06-29-24-2AASHTO T315-12: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)01/08/2019Not scheduledMajid EssaCT D08 - Field Laboratoryoriginal
2018-06-29-24-3AASHTO T315-12: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)01/08/2019Not scheduledMajid EssaCT D08 - Field LaboratoryRTFO
2018-06-29-24-4AASHTO T315-12: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)01/08/2019Not scheduledMajid EssaCT D08 - Field LaboratoryPAV
2018-06-29-24-5AASHTO T228-09r13: Standard Method of Test for Specific Gravity of Semi-Solid Asphalt Materials (Specific Gravity)01/08/2019Not scheduledMajid EssaCT D08 - Field Laboratory
2018-06-29-24-6AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)01/08/2019Not scheduledMajid EssaCT D08 - Field Laboratory
2018-06-29-24-7AASHTO T316-17: Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer01/08/2019Not scheduledMajid EssaCT D08 - Field Laboratory
2018-06-29-24-8AASHTO T44-14: Standard Method of Test for Solubility of Bituminous Materials01/08/2019Not scheduledMajid EssaCT D08 - Field Laboratory
2018-06-29-24-9AASHTO T48-17: Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup01/08/2019Not scheduledMajid EssaCT D08 - Field Laboratory