Print Report | Back to Sample Detail

Sample Record for 2018-05-22-17

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212997 DEA: 023H2104 EFIS: 0217000070 QA Service Level: 1
DIST-CO-RTE-PM: 02-PLU-70,89-53.5/58.4,21.0/29.9
Work Description: AC OVERLAY, REPLACE AC SURFACE, GUARDRAIL, SHOULDER BACKING
Location Description: PLUMAS COUNTY ON ROUTE 70 FROM GREENHORN RANCH ROAD TO 0.2 MILE EAST OF SLOAT ROAD AND ON ROUTE 89 FROM 0.3 MILE SOUTH OF ALTA CAMP ROAD TO CANYON DAM PICNIC AREA
Contractor Name: LAMON CONSTRUCTION
Contractor Address: 871 Von Geldern Way, Yuba City , CA 95991
Resident Engineer: Ronald Collins Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-05-22-17
TL Number from the TL Form: 894818
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 05/22/2018
Date that the sample was received by the laboratory/organization performing the testing: 05/23/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Combined Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77412
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Lockwood Hot Plant

Material Information

Source Identification (SMARA, name of Pit or Job Site): Lockwood Quarry (NV)
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: 3866
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number: JMF 18-13-S1
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2018-05-22-17-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 11/26/2018
Date Tested: 05/24/2018
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 99.4 %
Cumulative percent passing the 3/8 in. sieve 91.8 %
Cumulative percent passing the 1/4 in. sieve 64.9 %
Cumulative percent passing the #4 sieve 45.6 %
Cumulative percent passing the #8 sieve 28.6 %
Cumulative percent passing the #16 sieve 19 %
Cumulative percent passing the #30 sieve 12.9 %
Cumulative percent passing the #50 sieve 8.3 %
Cumulative percent passing the #100 sieve 5.2 %
Cumulative percent passing the #200 sieve 3.89 %