Sample Record for 2018-10-31-11
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 212980 DEA: 010G6404 EFIS: 0117000034
QA Service Level: 1
DIST-CO-RTE-PM: 01-HUM-101-58.8/65.6
Work Description: RHMA-GAP GRADED (BWC), REMOVE CONCRETE, PLACE DIKE AND MGS
Location Description: HUMBOLDT COUNTY IN AND NEAR FORTUNA FROM 0.7 MILE SOUTH OF KENMAR ROAD UNDERCROSSING TO 0.4 MILE SOUTH OF LOLETA DRIVE OVERCROSSING
Contractor Name: MERCER-FRASER COMPANY
Contractor Address: P O BOX 1006, EUREKA, CA 95502-1006
Resident Engineer: Robert King Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2018-10-31-11
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT D01 - District 1 Materials Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 10/31/2018
Date that the sample was received by the laboratory/organization performing the testing: 11/01/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: cold feed
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Mercer Fraser B
Material Information
Source Identification (SMARA, name of Pit or Job Site): 91-12-0002::SANDY PRAIRIE
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:
Aggregate Mix Number:
Test Results
Test 1 of 1
DIME Test ID: 2018-10-31-11-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 11/07/2018
Date Tested: 11/07/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested?
|
Combined Gradation
|
Cumulative percent passing the 2 in. sieve
|
100 %
|
Cumulative percent passing the 1 1/2 in. sieve
|
100 %
|
Cumulative percent passing the 1 in. sieve
|
100 %
|
Cumulative percent passing the 3/4 in. sieve
|
100 %
|
Cumulative percent passing the 1/2 in. sieve
|
96 %
|
Cumulative percent passing the 3/8 in. sieve
|
84 %
|
Cumulative percent passing the #4 sieve
|
32 %
|
Cumulative percent passing the #8 sieve
|
18 %
|
Cumulative percent passing the #16 sieve
|
12 %
|
Cumulative percent passing the #30 sieve
|
9 %
|
Cumulative percent passing the #50 sieve
|
6 %
|
Cumulative percent passing the #100 sieve
|
4 %
|
Cumulative percent passing the #200 sieve
|
2.5 %
|