Print Report | Back to Sample Detail

Sample Record for 2018-11-01-3

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 88888 DEA: STOCK EFIS: STOCK QA Service Level:
DIST-CO-RTE-PM: 59---
Work Description: Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-11-01-3
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Sample Organization Contact: (916) 227-7071
Type of Sample: Annual Source Testing
Type of Material: Cementitious
Sample Taken Date: 11/01/2018
Date that the sample was received by the laboratory/organization performing the testing: 11/01/2018
The quantity of what the sample constitutes: 1 Bucket
A brief description of the sample: Class F Flyash
From where was the sample collected: Source
Laboratory sample identification: CM185842
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Charah

Material Information

Brand: Charah
Mill: Dynegy Miami Fort 7
Type of Cementitious Material: Class F or N Flyash

Test Results

Test 1 of 7

DIME Test ID: 2018-11-01-3-2
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 07/17/2020
Date Tested: 02/26/2019
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test: 7 Day Break
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no
Compressive strength of 1st specimen (psi) 3346 psi
Compressive strength of 2nd specimen (psi) 3205 psi
Compressive strength of 3rd specimen (psi) 3268 psi
Average Compressive strength (to nearest 10 psi) 3270 psi

Test 2 of 7

DIME Test ID: 2018-11-01-3-3
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Verified Date: 07/17/2020
Date Tested: 03/19/2019
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test: 28 Day Break
Test Result Compliance:
Additional Comments When Verified:
Will control cubes be used per ASTM C311? no
Compressive strength of 1st specimen (psi) 4224 psi
Compressive strength of 2nd specimen (psi) 3918 psi
Compressive strength of 3rd specimen (psi) 4433 psi
Average Compressive strength (to nearest 10 psi) 4190 psi

Test 3 of 7

DIME Test ID: 2018-11-01-3-4
Test Method: ASTM C430-8: Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
Verified Date: 07/17/2020
Date Tested: 11/05/2018
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Correction Factor (CF) 0.30
Corrected Residue (Rc) 0.4

Test 4 of 7

DIME Test ID: 2018-11-01-3-5
Test Method: ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Verified Date: 07/17/2020
Date Tested: 02/26/2018
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Will control cubes be used per ASTM C311? yes
Age of specimen 7 days
The amount of flow 108 %
The amount of water used 48.0 %
Compressive strength of 1st specimen 3346 psi
Compressive strength of 2nd specimen 3205 psi
Compressive strength of 3rd specimen 3268 psi
Average Compressive strength (to nearest 10 psi) 3270 psi
Average Compressive strength (to nearest 10 psi) control group 4020 psi
Strength Activity Index of Portland Cement per ASTM C109 81 %

Test 5 of 7

DIME Test ID: 2018-11-01-3-6
Test Method: ASTM C109-16a: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Verified Date: 07/17/2020
Date Tested: 03/19/2018
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
General Comments for this Test: Specimen 2 outside allowable limits. Two cube average presented.
Test Result Compliance: complies
Additional Comments When Verified:
Will control cubes be used per ASTM C311? yes
Age of specimen 28 days
The amount of flow 108 %
The amount of water used 48.0 %
Compressive strength of 1st specimen 4224 psi
Compressive strength of 2nd specimen 3918 psi
Compressive strength of 3rd specimen 4433 psi
Average Compressive strength (to nearest 10 psi) 4330 psi
Average Compressive strength (to nearest 10 psi) control group 5030 psi
Strength Activity Index of Portland Cement per ASTM C109 86 %

Test 6 of 7

DIME Test ID: 2018-11-01-3-7
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
Data has not been verified.

Test 7 of 7

DIME Test ID: 2018-11-01-3-8
Test Method: ASTM C109-11: Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
Submitted By Organization: CT HQ - Sacramento Cement Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: ben.lenz@dot.ca.gov
Organization Phone: (916) 227-7071
Data has not been verified.

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.