Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213491 DEA: 031H6104 EFIS: 0316000190
QA Service Level: 1
DIST-CO-RTE-PM: 03---
Work Description: METS is performing preliminary field investigation and testing to help design choose a retrofitting plan for the Sacramento West End Viaduct.
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2018-10-26-4
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Per Request
Type of Material: SMTL TM6 - Steel Check Sample Plate
Sample Taken Date: 10/26/2018
Date that the sample was received by the laboratory/organization performing the testing: 10/26/2018
The quantity of what the sample constitutes: 1
A brief description of the sample: 3" x 8" Coupon
From where was the sample collected: Job Site
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Unknown
DIME Test ID: 2018-10-26-4-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Flat Sample)
Verified Date: 11/02/2018
Date Tested: 10/31/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
2
|
Sample | Heat Number | Width (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Total Elongation (%) | Tested By | | N/A | 0.501 | 0.1754 | 37210 | 59994 | 39.2 | Fred | | N/A | 0.505 | 0.1768 | 37637 | 59615 | 38.1 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 F
|
DIME Test ID: 2018-10-26-4-2
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 11/02/2018
Date Tested: 11/01/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Sample No.
|
1A
|
Rocap Number
|
no data
|
Heat Number(s)
|
no data
|
Mfg. Lot Number
|
no data
|
Finish Coating
|
Plain
|
Product Markings
|
no data
|
Size
|
no data in
|
Bolt Length
|
no data in
|
Hardness Reading Scale
|
B Scale
|
Hardness Reading Average
|
71.84
|
Spacing
|
Ok
|