Print Report | Back to Sample Detail

Sample Record for 2018-10-02-28

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 9999 DEA: 00000000 EFIS: 0000000000 COOP: 99999333399 MINOR: 333333 Permit Numbers: 555555 0400NRT0000 QA Service Level: 1
DIST-CO-RTE-PM: 03-SAC,OMG-888,99,80-0.6-0.6
Work Description: THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Location Description: THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES.
Contractor Name: YYZ
Contractor Address: 1234 address, Sacramento, CA 95824
Resident Engineer: RE_first RE_last Structure Rep.: SR_Last, SR_First

Sample Information

DIME Sample ID: 2018-10-02-28
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - Sacramento Office of Structural Materials Field Laboratory
Sample Organization Contact: 7146885366
Type of Sample: Quality Control
Type of Material: Aggregate
Sample Taken Date: 10/02/2018
Date that the sample was received by the laboratory/organization performing the testing: 10/12/2018
The quantity of what the sample constitutes: 1
A brief description of the sample: 1
From where was the sample collected: Source
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: aaa

Material Information

Source Identification (SMARA or name of Pit): 1111
The fabricator's/manufacturer's product name for the sample: Unknown
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: aa
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/8 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Results

Test 1 of 1

DIME Test ID: 2018-10-02-28-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 10/19/2018
Date Tested: 10/04/2018
Submitted By Organization: CT HQ - Sacramento Office of Structural Materials Field Laboratory
Organization Address: 5900 Folsom Blvd,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: bscott@altavistasolutions.com
Organization Phone: 7146885366
General Comments for this Test:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 0 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 79.4 %
Cumulative percent passing the 3/8 in. sieve 29.4 %
Cumulative percent passing the 1/4 in. sieve 0 %
Cumulative percent passing the #4 sieve 1 %
Cumulative percent passing the #8 sieve 1 %
Cumulative percent passing the #16 sieve 1 %
Cumulative percent passing the #30 sieve 1 %
Cumulative percent passing the #50 sieve 1 %
Cumulative percent passing the #100 sieve 1 %
Cumulative percent passing the #200 sieve 0.9 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.