Sample Record for 2018-10-11-2
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213062 DEA: 07292304 EFIS: 0712000109
QA Service Level: 1
DIST-CO-RTE-PM: 07-LA-5-25.6/26.0
Work Description: WIDEN OFF-RAMP, WIDEN BRIDGE, AND CONSTRUCT CONCRETE BARRIER.
Location Description: LOS ANGELES COUNTY IN LOS ANGELES FROM 0.1 MILE SOUTH TO 0.2 MILE NORTH OF ROUTE 5S/5 SEPARATION
Contractor Name: C. A. Rasmussen, Inc.
Contractor Address: 28548 Livingston Avenue, Valencia, CA 91355
Resident Engineer: Darrell McKenzie Structure Rep.: Aziz Maghsoudloo
Sample Information
DIME Sample ID: 2018-10-11-2
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT HQ - QASI Sacramento Field Office
Sample Organization Contact: (916) 2058871
Type of Sample: Quality Assurance
Type of Material: SMTL TM3 - Fastener Assembly
Sample Taken Date: 10/11/2018
Date that the sample was received by the laboratory/organization performing the testing: 10/11/2018
The quantity of what the sample constitutes: 1 lot
A brief description of the sample: 7/8 A328 Assemblies
From where was the sample collected: Fabricator
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Utah Pacific Bridge and Steel SLSB
Material Information
Rocap Number(s): UPBS 036824, UPBS 41655, UPBS 41366, UPBS 41750
Heat Number(s): 20269120, 10456760, 20458460, 10456240
Nut Mfg. Lot Number(s): 24650-6214189803
Washer Mfg. Lot Number(s): A439665, 783Z22
Bolt Specification: A325
Bolt Length(s): 2-1/4, 2-1/2, 2-3/4, 3-1/4
Nut Specification: A573 DH
Washer Specification: F436, F959
Finish: Plain
Diameter/Size: 7/8
Bolt Mfg. Lot Number: 036824, 041655, 041366, 041750
Rocap Test Requirement(s): Yes
Lubricant Requirements(s): No
Test Results
Test 1 of 14
DIME Test ID: 2018-10-11-2-1
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 3A | 41366 | 7/8\" | 63673 | 283.2 | 10 | A325 | Fred |
| |
|
UTM
|
400KIP
|
|
Temperature
|
no data
|
Test 2 of 14
DIME Test ID: 2018-10-11-2-2
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: A325
Test Result Compliance:
Additional Comments When Verified:
|
Number of Bolt Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Wedge Angle (deg) | Comments | Tested By | | 4A | 41750 | 7/8\" | 64271 | 285.9 | 10 | A325 | Fred |
| |
|
UTM
|
400KIP
|
|
Temperature
|
no data
|
Test 3 of 14
DIME Test ID: 2018-10-11-2-3
Test Method: ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test: Nut Proof Load
Test Result Compliance:
Additional Comments When Verified:
|
Number of Samples
|
1
|
| Sample | Bolt Mfg. Lot Number | Size (in) | Peak Load (lbf) | Peak Load (kN) | Comments | Tested By | | 1A | 24650-6214189803 | 7/8-9 Hex | 82315 | 366.16 | Nut Proof Load | Fred |
| |
|
UTM
|
400KIP
|
|
Temperature
|
72 F
|
Test 4 of 14
DIME Test ID: 2018-10-11-2-4
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
036824
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LE USA A325
|
|
Size
|
.875 in
|
|
Bolt Length
|
2.250 in
|
|
Gage Type
|
Pass
|
Test 5 of 14
DIME Test ID: 2018-10-11-2-5
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
41655
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
A325 SL
|
|
Size
|
.875 in
|
|
Bolt Length
|
2.50 in
|
|
Gage Type
|
Pass
|
Test 6 of 14
DIME Test ID: 2018-10-11-2-6
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
3A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
41366
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
A325 SL
|
|
Size
|
.875 in
|
|
Bolt Length
|
2.750 in
|
|
Gage Type
|
Pass
|
Test 7 of 14
DIME Test ID: 2018-10-11-2-7
Test Method: ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
4A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
41750
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
A325 SL
|
|
Size
|
.875 in
|
|
Bolt Length
|
3.250 in
|
|
Gage Type
|
Pass
|
Test 8 of 14
DIME Test ID: 2018-10-11-2-8
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
24650-6214189803
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
DH N
|
|
Size
|
.875 in
|
|
Gage Type
|
Pass
|
Test 9 of 14
DIME Test ID: 2018-10-11-2-9
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
24650-6214189803
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
DH N
|
|
Size
|
.875 in
|
|
Gage Type
|
Pass
|
Test 10 of 14
DIME Test ID: 2018-10-11-2-10
Test Method: ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1C
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
24650-6214189803
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
DH N
|
|
Size
|
.875 in
|
|
Gage Type
|
Pass
|
Test 11 of 14
DIME Test ID: 2018-10-11-2-11
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
036824
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
LE USA A325
|
|
Size
|
.875 in
|
|
Bolt Length
|
2.250 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
28.95
|
|
Spacing
|
Ok
|
Test 12 of 14
DIME Test ID: 2018-10-11-2-12
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
2A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
41655
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
A325 SL
|
|
Size
|
.875 in
|
|
Bolt Length
|
2.50 in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
27.72
|
|
Spacing
|
Ok
|
Test 13 of 14
DIME Test ID: 2018-10-11-2-13
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1A
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
A439665
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TSI F436
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
40.35
|
|
Spacing
|
Ok
|
Test 14 of 14
DIME Test ID: 2018-10-11-2-14
Test Method: ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)
Verified Date: 10/18/2018
Date Tested: 10/18/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Sample No.
|
1B
|
|
Rocap Number
|
no data
|
|
Heat Number(s)
|
no data
|
|
Mfg. Lot Number
|
A439665
|
|
Finish Coating
|
Plain
|
|
Product Markings
|
TSI F436
|
|
Size
|
.875 in
|
|
Bolt Length
|
no data in
|
|
Hardness Reading Scale
|
C Scale
|
|
Hardness Reading Average
|
4.5
|
|
Spacing
|
Ok
|
