Print Report | Back to Sample Detail

Sample Record for 2018-09-21-15

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 213182 DEA: 030C4724 EFIS: 0314000272 QA Service Level: 1
DIST-CO-RTE-PM: 03-YOL-16-20.5/21.3, 28.2/31.8
Work Description: ADD TURN LANES & ROUNDABOUT, ALIGN CURVE, WIDEN SHOULDER, CULVERT WORK
Location Description: YOLO COUNTY NEAR ESPARTO FROM 0.3 MILE WEST TO 0.4 MILE EAST OF COUNTY ROAD 79 AND FROM 0.1 MILE EAST OF PLAINFIELD STREET TO 0.1 MILE EAST OF COUNTY ROAD 90
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: 1520 Fourth St., Berkeley, CA 94710
Resident Engineer: Mohammad Yusufzai Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-09-21-15
TL Number from the TL Form: 783660
Sample Submitted By Organization: CT D03 - North Region Materials Lab
Sample Organization Contact: (530) 741-4238
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 09/21/2018
Date that the sample was received by the laboratory/organization performing the testing: 09/24/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: Aggs for JMF
From where was the sample collected: Source
Laboratory sample identification: 03JMF18-031
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Vulcan Materials - Madison

Material Information

Source Identification (SMARA or name of Pit): 91-57-0008::SOLANO CONCRETE OFF-CHANNEL
The fabricator's/manufacturer's product name for the sample: 1/2 RHMA TYPE G
The fabricator/manufacturer designation for the sample: 326120-MSRD
The plant number: NA
A detailed description of where the material sample was collected: Hot Bins
Where the material sample would have been placed if not sampled: Batch Drum
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: NA
Lot number:
Sublot number:

Test Results

Test 1 of 7

DIME Test ID: 2018-09-21-15-1
Test Method: AASHTO T11-5: Standard Method of Test for Materials Finer Than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Which test procedure is being used Method A
Percent of sample passing the #200 sieve (by mass) 1.6 %

Test 2 of 7

DIME Test ID: 2018-09-21-15-2
Test Method: AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Sand Equivalent 72

Test 3 of 7

DIME Test ID: 2018-09-21-15-3
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Does this test use 1/4 sieve? (question for HMA Gradation Type) Yes
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 100 %
Cumulative percent passing the 1/2 in. sieve 96 %
Cumulative percent passing the 3/8 in. sieve 81 %
Cumulative percent passing the 1/4 in. sieve 45 %
Cumulative percent passing the #4 sieve 39 %
Cumulative percent passing the #8 sieve 19 %
Cumulative percent passing the #16 sieve 10.7 %
Cumulative percent passing the #30 sieve 6.4 %
Cumulative percent passing the #50 sieve 3.8 %
Cumulative percent passing the #100 sieve 2.3 %
Cumulative percent passing the #200 sieve 1.6 %

Test 4 of 7

DIME Test ID: 2018-09-21-15-4
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
What test method is performed? Method A
Bulk dry specific gravity 2.601
Average uncompacted voids 46.8 %

Test 5 of 7

DIME Test ID: 2018-09-21-15-5
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Bulk specific gravity 2.601
Bulk specific gravity (SSD Basis) 2.650
Apparent specific gravity 2.733
Absorption 1.9 %

Test 6 of 7

DIME Test ID: 2018-09-21-15-6
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: not applicable
Additional Comments When Verified:
Basis for relative density testing Bulk
Specific Gravity 2.656
Absorption 1.1 %

Test 7 of 7

DIME Test ID: 2018-09-21-15-7
Test Method: AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)
Verified Date: 10/08/2018
Date Tested: 10/08/2018
Submitted By Organization: CT D03 - North Region Materials Lab
Organization Address: 5330 Arboga Rd,
Organization City: Olivehurst
Organization State: CA
Organization Zipcode: 95961
Organization Email: jeff.herbert@dot.ca.gov
Organization Phone: (530) 741-4238
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Grading designation B
Mass of sample on No.12 sieve (after 500 revolutions) 3834 grams
Percent loss after 100 revolutions 5 %
Percent loss after 500 revolutions 23 %

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.