Sample Record for 2018-09-25-6
Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project Information
Project ID: 213213 DEA: 030G8004 EFIS: 0316000246
QA Service Level: 1
DIST-CO-RTE-PM: 03-COL,GLE,SAC,SUT,YUB-5,20,65,80,99-VAR
Work Description: REMOVE AC, PLACE METHACRYLATE & REPAIR BRIDGE JOINTS ON 9 BRIDGES
Location Description: COLUSA, GLENN, SACRAMENTO, SUTTER, AND YUBA COUNTIES AT VARIOUS LOCATIONS
Contractor Name: Truesdell Corporation of California
Contractor Address: 1310 W. 23rd Street, Tempe, AZ 85282
Resident Engineer: Aaron Chamberlin Structure Rep.: Unknown
Sample Information
DIME Sample ID: 2018-09-25-6
TL Number from the TL Form: NA
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM1 - Elastomeric Bearing Pad
Sample Taken Date: 09/25/2018
Date that the sample was received by the laboratory/organization performing the testing: 09/28/2018
The quantity of what the sample constitutes: 1
A brief description of the sample: Bearing Pad
From where was the sample collected: Manufacturer
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: DS Brown Seismic Energy
Material Information
Mfg. Lot Number(s): 4000713-1A
Material/Compound/Elastomer ID: NA
Samples Representing: 1
Description (size): 1.724" x 12" x 19"
Comments: Unknown
Description (Number of Shims): 3
Type of Bearing Pad: Steel
Description (Thickness of Shims): 14 gage
Manufacturer(s): DS Brown
Batch Number: NA
Test Results
Test 1 of 4
DIME Test ID: 2018-09-25-6-1
Test Method: SMTL BILST-06: (Neoprene Verification) Bilstein Test
Verified Date: 10/04/2018
Date Tested: 10/04/2018
Submitted By Organization: CT HQ - Sacramento Chemistry Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: sanchita.dey@dot.ca.gov
Organization Phone: (916) 227-7912
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
Test 2 of 4
DIME Test ID: 2018-09-25-6-2
Test Method: ASTM D2240-05re10: Standard Test Method for Rubber Property - Durometer Hardness
Verified Date: 10/16/2018
Date Tested: 10/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Temperature
|
72 f
|
|
Humidity
|
50 %
|
|
Reading #1
|
53
|
|
Reading #2
|
54
|
|
Reading #3
|
54
|
|
Reading #4
|
53
|
|
Reading #5
|
54
|
|
Mean
|
53.6
|
Test 3 of 4
DIME Test ID: 2018-09-25-6-3
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Verified Date: 10/16/2018
Date Tested: 10/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
Unit of the Ultimate Tensile Values
|
lbf per sqr in
|
|
UTM
|
2KIP
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.074 in
|
|
Sample 1 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 1 Ultimate Tensile
|
2918.9 lbf/in^2
|
|
Sample 1 Elongation (350% Min)
|
Pass
|
|
Sample 2 Median Thickness
|
0.076 in
|
|
Sample 2 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 2 Ultimate Tensile
|
2736.8 lbf/in^2
|
|
Sample 2 Elongation (350% Min)
|
Pass
|
|
Sample 3 Median Thickness
|
0.072 in
|
|
Sample 3 Thickness all Within 0.003 inch?
|
Yes
|
|
Sample 3 Ultimate Tensile
|
2944.4 lbf/in^2
|
|
Sample 3 Elongation (350% Min)
|
Pass
|
|
Median of the Ultimate Tensile Values
|
2918.9 lbf/in^2
|
Test 4 of 4
DIME Test ID: 2018-09-25-6-4
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Verified Date: 10/16/2018
Date Tested: 10/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of specimens tested
|
3
|
|
UTM
|
no data
|
|
Humidity
|
50 %
|
|
Temperature
|
72 F
|
|
Sample 1 Median Thickness
|
0.067 in
|
|
Sample 1 Tear Strength
|
253.7 lbf / in
|
|
Sample 2 Median Thickness
|
0.07 in
|
|
Sample 2 Tear Strength
|
285.7 lbf / in
|
|
Sample 3 Median Thickness
|
0.071 in
|
|
Sample 3 Tear Strength
|
267.6 lbf / in
|
|
Median of the Tear Strength Values
|
267.6 lb/in
|
