Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
DEA: No Project
QA Service Level:
DIST-CO-RTE-PM: ---
Work Description: Special project identifier for material not associated with a project
Location Description:
Contractor Name: Unknown
Contractor Address: Unknown
Resident Engineer: Unknown Structure Rep.: Unknown
DIME Sample ID: 2018-09-28-8
TL Number from the TL Form: NA
Sample Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Organization Contact: (530) 329-6527
Type of Sample: Quality Assurance
Type of Material: SMTL TM6 - Ductile Iron Cast Samples
Sample Taken Date: 09/28/2018
Date that the sample was received by the laboratory/organization performing the testing: 10/02/2018
The quantity of what the sample constitutes: 8
A brief description of the sample: Ductile Iron Casting
From where was the sample collected: Distributor
Laboratory sample identification: Unknown
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: SDI Farrar
Heat Number (s): G118, G128, G138, G208, H028, H098, H098, H10
Part Number (s): 27 6 AH 27 6 PC BP 19 6 PCI BP 19 6 PC1 BP F
Material Specification: A536
Grades: 80-55-06
Metal Foundry Manufacturer (Mill): Farrar Corporation
Prestressing Manufacturer: SDI
DIME Test ID: 2018-09-28-8-1
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Verified Date: 10/10/2018
Date Tested: 10/05/2018
Submitted By Organization: CT HQ - Sacramento Structural Materials Testing Laboratory
Organization Address: 5900 Folsom Boulevard,
Organization City: Sacramento
Organization State: CA
Organization Zipcode: 95819
Organization Email: joshua.moore@dot.ca.gov
Organization Phone: (530) 329-6527
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
Number of Samples
|
8
|
Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By | | G118 | 0.501 | 0.1971 | 65040 | 114760 | 8.1 | Fred | | G128 | 0.501 | 0.1971 | 65065 | 113630 | 8.6 | Fred | | G138 | 0.501 | 0.1971 | 63093 | 107850 | 9.6 | Fred | | G208 | 0.5 | 0.1963 | 60831 | 105740 | 9.6 | Fred | | H028 | 0.501 | 0.1971 | 61512 | 106410 | 9.7 | Fred | | H098 | 0.5 | 0.1963 | 61500 | 107510 | 9.7 | Fred | | H098 | 0.501 | 0.1971 | 61675 | 105770 | 9.8 | Fred | | H108 | 0.501 | 0.1971 | 63463 | 111070 | 11 | Fred |
| |
UTM
|
67KIP
|
Temperature
|
72 F
|