Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.
Project ID: 213297 DEA: 010H3704 EFIS: 0117000165
QA Service Level: 1
DIST-CO-RTE-PM: 01-LAK-20-33.6/37.1,45.2/46.5
Work Description: RUBBERIZED HOT MIX ASPHALT - GAP GRADED AND MIDWEST GUARDRAIL SYSTEM
Location Description: LAKE COUNTY NEAR CLEARLAKE OAKS FROM 0.6 MILE EAST OF NEW LONG VALLEY ROAD TO NORTH FORK CACHE CREEK BRIDGE AND FROM 1.4 MILES EAST OF ABBOT MINE ROAD TO COLUSA COUNTY LINE
Contractor Name: GRANITE CONSTRUCTION COMPANY
Contractor Address: 1324 S. State Street, Ukiah, CA 95482
Resident Engineer: Dan Kraft Structure Rep.: Unknown
DIME Sample ID: 2018-08-16-10
TL Number from the TL Form: Unknown
Sample Submitted By Organization: CT D01 - District 1 Materials Laboratory
Sample Organization Contact: (707) 496-0974
Type of Sample: Verification
Type of Material: Hot Mix Asphalt
Sample Taken Date: 08/16/2018
Date that the sample was received by the laboratory/organization performing the testing: 08/18/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 1/2 in RHMA-G
From where was the sample collected: Manufacturer
Laboratory sample identification: 62110
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Granite HWY 175
DIME Test ID: 2018-08-16-10-1
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Verified Date: 08/29/2018
Date Tested: 08/29/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
What temperature unit is used?
|
Fahrenheit
|
|
Test procedure used?
|
Method A
|
|
Mass of HMA Sample prior to ignition
|
no data
|
|
Corrected Asphalt Binder Content
|
7.47 %
|
|
Mass Loss
|
no data
|
|
Correction Factor (Percent by mass of HMA Specimen)
|
no data
|
|
Moisture Content
|
no data
|
|
Temperature Compensation Factor
|
no data
|
|
Test Temperature
|
no data
|
DIME Test ID: 2018-08-16-10-2
Test Method: AASHTO T329-13: Standard Method of Test for Moisture Content of Asphalt Mixtures by Oven Method (Moisture Content)
Verified Date: 08/29/2018
Date Tested: 08/29/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance: complies
Additional Comments When Verified:
|
Moisture Content
|
0.00 %
|
|
Percent Change
|
0 %
|
DIME Test ID: 2018-08-16-10-3
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Verified Date: 08/29/2018
Date Tested: 08/29/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Bulk Specific Gravity
|
2.321
|
|
Bulk Specific Gravity 2
|
2.322
|
|
Bulk Specific Gravity 3
|
2.315
|
|
Average Bulk Specific Gravity
|
2.319
|
DIME Test ID: 2018-08-16-10-4
Test Method: AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)
Verified Date: 08/29/2018
Date Tested: 08/29/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
|
Number of tests
|
1
|
|
What is the unit of measurement for theoretical density?
|
US Units
|
|
Mass Determination
|
Air
|
|
Specific Gravity for Sample 1
|
2.491
|
|
Theoretical maximum density at 25°C (77°F)
|
no data
|
DIME Test ID: 2018-08-16-10-5
Test Method: AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)
Verified Date: 08/29/2018
Date Tested: 08/29/2018
Submitted By Organization: CT D01 - District 1 Materials Laboratory
Organization Address: 1726 Albee Street,
Organization City: Eureka
Organization State: CA
Organization Zipcode: 95501
Organization Email: leif.ayres@dot.ca.gov
Organization Phone: (707) 496-0974
General Comments for this Test:
Test Result Compliance: does not comply
Additional Comments When Verified:
|
Percent Air Voids
|
6.8 %
|
|
Percent Air Voids 2
|
6.8
|
|
Percent Air Voids 3
|
7.1
|
|
Percent Air Voids Average
|
6.9
|
