Print Report | Back to Sample Detail

Sample Record for 2018-08-17-11

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212267 DEA: 044J3404 EFIS: 0415000331 QA Service Level: 1
DIST-CO-RTE-PM: 04-CC-80-0.0/10.1
Work Description: COLD PLANE AND OVERLAY PAVEMENT, INSTALL GUARDRAIL AND CURB RAMPS.
Location Description: CONTRA COSTA COUNTY, IN AND NEAR RICHMOND, EL CERRITO, SAN PABLO, PINOLE AND HERCULES, FROM ALAMEDA/CONTRA COSTA COUNTY LINE TO ROUTE 80/ 4 SEPARATION
Contractor Name: O.C. JONES & SONS, INC.
Contractor Address: 1520 4th Street, Berkeley, CA 94710
Resident Engineer: Ranjeet Singh Structure Rep.: Unknown

Sample Information

DIME Sample ID: 2018-08-17-11
TL Number from the TL Form: T101 C872254
Sample Submitted By Organization: CT D02 - North Region Materials Lab
Sample Organization Contact: (530) 225-3194
Type of Sample: Acceptance
Type of Material: Aggregate
Sample Taken Date: 08/17/2018
Date that the sample was received by the laboratory/organization performing the testing: 08/22/2018
The quantity of what the sample constitutes: JMF 17 bags
A brief description of the sample: JMF, 4 bins virgin aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77617
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Sya Batch Plant Vallejo

Material Information

Source Identification (SMARA or name of Pit): unknpwn
The fabricator's/manufacturer's product name for the sample: JMF 4 bins virgin aggregate
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: At the plant
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 1/2 inch
The concrete mix design number: Unknown
Lot number:
Sublot number:

Test Results

Test 1 of 6

DIME Test ID: 2018-08-17-11-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
Data has not been verified.

Test 2 of 6

DIME Test ID: 2018-08-17-11-2
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
Data has not been verified.

Test 3 of 6

DIME Test ID: 2018-08-17-11-3
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
Data has not been verified.

Test 4 of 6

DIME Test ID: 2018-08-17-11-4
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
Data has not been verified.

Test 5 of 6

DIME Test ID: 2018-08-17-11-5
Test Method: AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
Data has not been verified.

Test 6 of 6

DIME Test ID: 2018-08-17-11-6
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Submitted By Organization: CT D02 - North Region Materials Lab
Organization Address: 1657 Riverside Dr,MS-83
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: (530) 225-3194
Data has not been verified.

Tests Assigned to this Sample

DIME Test IDTest MethodAssigned DateTest DateAssigned ByAssigned LabTest CommentsAssigned To
No tests have been assigned to this sample.