Print Report | Back to Sample Detail

Sample Record for 2018-04-12-9

Note: Fields with no data or with a value of "Unknown" will not be displayed on the print out.

Project Information

Project ID: 212497 DEA: 024E0204 EFIS: 0200020196 QA Service Level: 1
DIST-CO-RTE-PM: 02-SHA-299-77.8/79.7
Work Description: PULVERIZE AND RECONSTRUCT PAVEMENT, AND WIDEN WITH AB, HMA, & RHMA
Location Description: SHASTA COUNTY NEAR BURNEY FROM 0.2 MILE WEST OF SONOMA STREET TO 0.3 MILE WEST OF ROUTE 89
Contractor Name: HAT CREEK CONSTRUCTION & MATERIALS, INC.
Contractor Address: 24339 Highway 89, N. Burney, CA 96013
Resident Engineer: Tofael Anwar Structure Rep.: Christopher S 'Chris' Brace

Sample Information

DIME Sample ID: 2018-04-12-9
TL Number from the TL Form: 853527
Sample Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Sample Organization Contact: (530) 225-3194
Type of Sample: Verification
Type of Material: Aggregate
Sample Taken Date: 04/12/2018
Date that the sample was received by the laboratory/organization performing the testing: 04/13/2018
The quantity of what the sample constitutes: JMF Verification
A brief description of the sample: 3/4-inch Type A Treated Virgin Aggregate
From where was the sample collected: Manufacturer
Laboratory sample identification: D77324A
Structure unique identifier:
Structure name:
The fabricator/manufacturer/facility name: Hat Creek - Shaw Pit Facility

Material Information

Source Identification (SMARA, name of Pit or Job Site): 91-25-0008::SHAW PIT
The fabricator's/manufacturer's product name for the sample: 18-1278.96
The fabricator/manufacturer designation for the sample: Unknown
The plant number: Unknown
A detailed description of where the material sample was collected: Cold Feed
Where the material sample would have been placed if not sampled: Unknown
Primary Aggregate Nominal Size: 3/4 inch
The concrete mix design number: JMF 18-01-S1a
Lot number:
Sublot number:
Aggregate Mix Number:
Test results on following page(s): 1

Test Results

Test 1 of 1

DIME Test ID: 2018-04-12-9-1
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Verified Date: 08/20/2018
Date Tested: 04/13/2018
Submitted By Organization: CT D02 - Redding Northern Regional Laboratory
Organization Address: 1657 Riverside Drive,
Organization City: Redding
Organization State: CA
Organization Zipcode: 96001
Organization Email: ward.jenkins@dot.ca.gov
Organization Phone: 530-225-3194
General Comments for this Test:
Test Result Compliance:
Additional Comments When Verified:
What type of gradation is being tested? HMA Gradation
Cumulative percent passing the 1 1/2 in. sieve 100 %
Cumulative percent passing the 1 in. sieve 100 %
Cumulative percent passing the 3/4 in. sieve 99.3 %
Cumulative percent passing the 1/2 in. sieve 82.3 %
Cumulative percent passing the 3/8 in. sieve 69.7 %
Cumulative percent passing the 1/4 in. sieve 53.1 %
Cumulative percent passing the #4 sieve 43 %
Cumulative percent passing the #8 sieve 25 %
Cumulative percent passing the #16 sieve 16 %
Cumulative percent passing the #30 sieve 11 %
Cumulative percent passing the #50 sieve 7.9 %
Cumulative percent passing the #100 sieve 5.8 %
Cumulative percent passing the #200 sieve 4.43 %